Glitar MD-1244 Print 1200*400*400mm high accuracy.04-.02 mm


$11,999.00

Add to Cart:


  • Description
  • Details
  • Reviews
  • Custom Tab
Glitar MD-1244 Print 1200*400*400mm high accuracy.04-.02 mm
Nozzle Temperature 260 degree
Platform Temperature 110 degree
Connectivity USB /SD Card
Nozzle Diameter stand 0.4mm(No blockage)
Layer Thickness 0.05-0.3mm
Max Printing speed 200mm/s
Travel linear guide rail
AC Input 95-265V, 50/60Hz
Voltage 1200W
Ball screw Dual Ball screws , diameter 16mm
File Types File Types: STL, OBJ, G-Code Supports Windows, Linux, Mac OX
Frame Material High-end Stainless Steel
Display&Controller 5.0 inch LCD touch screen
Heating bed 15mm thickness Aluminum heating bed , 1200W
1) Warranty: consunmable accessories 3 month (ceramic tube,nozzle,teflon tube, sensor cable ) , others 1year.
2) Technique support: Our engineers provide free technical support and free training upon request.
Packing Size 1630*810*1130
N.W/G.W 300 KG/350KG
Device Dimension 1430*610*930mm
1. Fully enclosed design , temperature is stable inside machine Semi- enclosed , printing performance influenced by cold weather
2. Linear guide rail Rods structure, lower precise due to angular deviation around the track
3. Dual ball screws and 16mm axis to support the heat bed Single ball screw and 8mm/ 12mm Z axis on the back
4.Double-layer structure design of parallel-plate under heat bed, its flatness can reach 0.1mm-0.2mm Simple aluminum board, more difficult to adjust
5. Modular design for motor assembly, heater, temperature sensors, all of them have connectors , much easier for service. All components are connected on, very hard to replace parts
6. 57 stepper motor gear and 3M Belt , Besides, using Tank Chain to protect the cables / wires
7. Customized industrial nozzle, melt the material faster
8. Also improve the compatiable bettween the machine with the software.
9. UPS (Uninterruptible Power System), resume printing after interruption
Glitar MD-1244 Print 1200*400*400mm
Glitar MD-1244 Print 1200*400*400mm
Glitar MD-1244 Print 1200*400*400mm
  • 100 Units in Stock

Be the first to write a review.  Write a Review.
Safety Tip


This product was added to our catalog on Monday 06 March, 2017.

Content

OFFTHEGRIDWATER.CA

Rc-toys Multi Rotor safty Tip Keep your PROPS OFF not installed until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures - realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static - PROPS may start at anytime without warning. Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe. Never ASSUME the props will not start - removing the props removes the risk.



your alt text here