BLITZ IFlight Mini F4 StackMPU6000 F4 Flight Controller 4IN1 ESC


$140.99

Add to Cart:


  • Description
  • Details
  • Reviews
  • Custom Tab
Features
1. When using DJI FPV image transmission, it is plug and play without welding
2. With bat, + 5V, 3.3 and start indicators, it can display the current working state of flight control
3. With LC filtering, fully filter power interference and continue the clean filtering style
4. The black box has a capacity of 16MB
Product Details
FC // BLITZ Mini F4 Flight Controller
Specification:
- MCU:STM32F405
- Gyro:MPU6000
- Baro: NO
- Betaflight OSD:IFLIGHT OSD (AT7456E)
- Blackbox:16MB
- 5 X Uarts
- UART1 for VTX HD/Analog
- UART2 for Receiver
- UART3?UART4 for GPS or 0ther sensors that require a serial port
- UART6 for ESC Telemetry
- 4×Dshot/PWMoutputs
- 1×I2C
-1 xSH1.0 9pin connector for HD VTX/Analog VTX&CAM (5V/BAT/G/VO/T1/R1 /5V/G/VI)
- 1 xSH1.0 8pin connector for ESC(R6/CUR/M4/M3/M2/M1/BAT/G)
- 1xSH1.0 6pin connector for Any Receiver or DJI(3V3/R2i/5V /G/R2/T2)
- 1xSH1.0 4Pin connector GPS (T4/R4/G/5V)
- 1xSH1.0 4Pin connector LED&Beeper (BUZ/LED/G/5V)
- Smartaudio&IRCTramp VTX protocol supported
- WS2812ledStrip:Yes
- Bepper:Yes
- Firmware: IFRC-BASEF4 4.X.X
- Mounting:20*20mm/f4
- Dimensions:30.5*27mm
- Weight:5.0g
ESC // BLITZ Mini E55S 4-IN-1 2-6S ESC
Specification:
- Dimension: 35*42mm
- Mounting Holes: 20*20mm/F4mm
- Weight: 11.3g
- Supports 2-6S lipo input
- MCU:BB21
- Constant: 55 Amps
- Burst: 60 Amps
- Current sensor: Yes
- BEC: No
- Current rate: 100
- Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.
- Target: QH-50 16.7
IF-F4-E55S
IFlight BLITZ Mini F4 Stack MPU6000 F4 Flight Controller BLITZ Mini E55S 4-IN-1 ESC for FPV Drone
IFlight BLITZ Mini F4 Stack MPU6000 F4 Flight Controller BLITZ Mini E55S 4-IN-1 ESC for FPV Drone
IFlight BLITZ Mini F4 Stack MPU6000 F4 Flight Controller BLITZ Mini E55S 4-IN-1 ESC for FPV Drone
IFlight BLITZ Mini F4 Stack MPU6000 F4 Flight Controller BLITZ Mini E55S 4-IN-1 ESC for FPV Drone
IFlight BLITZ Mini F4 Stack MPU6000 F4 Flight Controller BLITZ Mini E55S 4-IN-1 ESC for FPV Drone
IFlight BLITZ Mini F4 Stack MPU6000 F4 Flight Controller BLITZ Mini E55S 4-IN-1 ESC for FPV Drone
IFlight BLITZ Mini F4 Stack MPU6000 F4 Flight Controller BLITZ Mini E55S 4-IN-1 ESC for FPV Drone
  • 100 Units in Stock

Be the first to write a review.  Write a Review.
Safety Tip


This product was added to our catalog on Friday 17 December, 2021.

Content

OFFTHEGRIDWATER.CA

Rc-toys Multi Rotor safty Tip Keep your PROPS OFF not installed until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures - realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static - PROPS may start at anytime without warning. Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe. Never ASSUME the props will not start - removing the props removes the risk.



your alt text here