F7StarMini 45A Flight Controller Stack 3-6S MPU6000 F722 RGB LED


$111.00

Add to Cart:


  • Description
  • Details
  • Reviews
  • Custom Tab
Features
HIFIONRC F7 MINI has wireless bluetooth parameter modulation function.
The UART used for bluetooth parameter modulation is UART4_MSP.
The bluetooth signal is isolated and will not interfere with the receiver
and other devices (if you can't find the Bluetooth antenna, don't worry, I will hide it) Up)
This FC includes a DJI HD cable by default. If you use DJI HD, it means that you
don't need to purchase the flight controller to connect DJI HD cable again.
If you are using a traditional analog image transmission transmitter,
please don't worry, this flight controller has an AT7456 chip, so you can still use the OSD function.
The STM32F722 microcontroller has a built-in inverter. The receiver can be installed on any RX,
and it can be used by opening the corresponding UART port (the default is RX2_UART2).
Product Details
Flight controller:
MCU: STM32F722RGT6 216 MHZ
IMU: MPU6000
OSD: Betaflight SPI 0SD & DJI HD 0SD (UART6)
UART: 6 groups
Bluetooth tuning: there is a corresponding port UART4_ MSP
Barometer: Yes
Motor signal output quantity: 6 channels
BEC: 5V 2.5A + 9V 2.5A dual-channel BEC supports stable power supply for DJI HD and high-power
analog image transmission [Add smart short-circuit protection]
Input voltage: 3-6S
Black box: 16Mb
Use firmware: HIFIONRC F7 [support mainstream firmware such as BETAFLIGHT INAV EMUFLIGHT]
LED: The flight controller comes with 10 programmable LED lights, more happiness is waiting for you to discover.
Receiver: Support Sbus, CRSF, IBUS, Spektrum 1024/2048, Sbus, XBUS, SumD and SumH RX,
built-in reverser, support 3.3V Spektrum satellite receiver.
Installation size: M3 shock absorption column, the installation hole is 20mmx20mm
Dimensions 30 mm x 30 mm
Flight control weight: 5.2 grams
ESC:
Firmware name BLheli-S 16. 7
Firmware specification: GH 30
On-board galvanometer calibration value 245
Default calibration value of onboard voltmeter
Have a flight control socket.
Shock absorption design can be installed. For 45A, 15 to 22 motors are recommended. [For reference only, actually choose according to the motor efficiency diagram]

HIFIONRC F7Star Mini 45A Flight Controller Stack 3-6S MPU6000 F722 RGB LED BLHELI_S 45A 4in1 ESC for FPV Racing Drones
HIFIONRC F7Star Mini 45A Flight Controller Stack 3-6S MPU6000 F722 RGB LED BLHELI_S 45A 4in1 ESC for FPV Racing Drones
HIFIONRC F7Star Mini 45A Flight Controller Stack 3-6S MPU6000 F722 RGB LED BLHELI_S 45A 4in1 ESC for FPV Racing Drones
HIFIONRC F7Star Mini 45A Flight Controller Stack 3-6S MPU6000 F722 RGB LED BLHELI_S 45A 4in1 ESC for FPV Racing Drones
HIFIONRC F7Star Mini 45A Flight Controller Stack 3-6S MPU6000 F722 RGB LED BLHELI_S 45A 4in1 ESC for FPV Racing Drones
  • 100 Units in Stock

Be the first to write a review.  Write a Review.
Safety Tip


This product was added to our catalog on Monday 22 March, 2021.

Content

OFFTHEGRIDWATER.CA

Rc-toys Multi Rotor safty Tip Keep your PROPS OFF not installed until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures - realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static - PROPS may start at anytime without warning. Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe. Never ASSUME the props will not start - removing the props removes the risk.



your alt text here