PT60 Airspeed Meter Sensor digital airspeed meter for Pixhawk


$80.00

Add to Cart:


  • Description
  • Details
  • Reviews
  • Custom Tab
PT60 Airspeed Meter Sensor digital airspeed meter for Pixhawk PX4 Flight Controller
Features
PT60 Airspeed Meter & Sensor Head Pitot Tube digital airspeed meter for Pixhawk PX4 Flight Controller
Product Details
Differential Pressure Sensor board.
The MPXV7002 series piezoresistive transducer in the small outline package (SOP) is a state-of-the-art monolithic silicon pressure sensor designed for a wide range of applications, but particularly those employing a microcontroller or microprocessor with A/D inputs. This patented, single element transducer combines advanced micromachining techniques, thin-film metallization, and bipolar processing to provide an accurate, high level analog output signal that is proportional to the applied pressure.

The MPXV7002 is designed to measure positive and negative pressure. In addition, with an offset specifically at 2.5V instead of the conventional 0V, this new series allows to measure pressure up to 7kPa through each port for pressure sensing but also for vacuum sensing (refer to the transfer function in the data sheet for more detailed information). Features: -2 to 2 kPa (-0.3 to 0.3 psi). 0.5 to 4.5 V Output
14grams
Item Packing
PT60 Airspeed Meter & Sensor Head Pitot Tube digital airspeed meter for Pixhawk PX4 Flight Controller x 1

Detailed Images
  • 100 Units in Stock

Be the first to write a review.  Write a Review.
Safety Tip


This product was added to our catalog on Friday 04 January, 2019.

Content

OFFTHEGRIDWATER.CA

Rc-toys Multi Rotor safty Tip Keep your PROPS OFF not installed until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures - realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static - PROPS may start at anytime without warning. Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe. Never ASSUME the props will not start - removing the props removes the risk.



your alt text here