PX4FLOW 2.1 Smart Optic Flow Module MT9V034 CMOS No Sonar


$89.00

Add to Cart:


  • Description
  • Details
  • Reviews
  • Custom Tab
Features
MT9V034 machine vision CMOS sensor with global shutter
Optical flow processing at 4×4 binned image at 400 Hz
Superior light sensitivity with 24×24 μm super-pixels
Onboard 16bit gyroscope up to 2000°/s and 780 Hz update rate, default high precision-mode at 500°/s
Onboard sonar input and mount for Maxbotix sonar sensors. (HRLV-EZ4 ) USB bootloader
USB serial up to 921600 baud (including live camera view with QGroundControl)
USB power option
Does fit the MatrixVision Bluefox MV mounting holes (camera center off-centered)
Product Details
The board is without Maxbotix sonar please notice this, adopting 16mm lens, DF13 terminal
168 MHz Cortex M4F CPU (128 + 64 KB RAM)
752—480 MT9V034 image sensor, L3GD20 3D Gyro
16 mm M12 lens (IR block filter)
Size 32.5*38mm
Power consumption 115mA / 5V
Item Packing
CUAV PX4FLOW 2.1 Smart Optic Flow Module No Sonar x 1
PX4FLOW 2.1 Smart Optic Flow Module MT9V034 CMOS No Sonar
PX4FLOW 2.1 Smart Optic Flow Module MT9V034 CMOS No Sonar
  • 100 Units in Stock

Be the first to write a review.  Write a Review.
Safety Tip


This product was added to our catalog on Monday 29 April, 2019.

Content

OFFTHEGRIDWATER.CA

Rc-toys Multi Rotor safty Tip Keep your PROPS OFF not installed until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures - realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static - PROPS may start at anytime without warning. Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe. Never ASSUME the props will not start - removing the props removes the risk.



your alt text here