Align G3-5D 3-Axis Brushless Gimbal Camera Mount RGG302


$1,599.99

 Sold Out 

  • Description
  • Details
  • Reviews
  • Custom Tab
Joe Doe Align Features 3-axis brushless gimbal for Canon 5D series or similar sized cameras. Features strong brushless mtors which makes camera balance less critical. Built in HDMI to AV converter allows live video output into the optional video transmitter. This gimbal system is a stand-alone design independent of the flight controller.
Features:
- Utilizes with PC and bluetooth for iOS and Android system
- Internal receiver function can be compatible with systems on the markte
- Standalone system can be operated sperately
- Support Pinpoint and Panoramic photography
- Design for handheld gimbal system
- High locking, high resolution and brushless motor
- Internal HDMI-HD/AV module
Product Details
- Input: DC12V 3S
- Current consumption: <500mA
- Control range: Pan 360degree; Roll +/-30degree, Tilt 90degree
- Max.controllable rotation speed: Pan 60°/S; Roll 60°/S; Tilt 60°/S
- Work temperature: -20~80°C
- Receiver output: 5V 0.5A
- Dimension: 59.5*35*16.4mm
- Weight: 1250g
HDMI to AV Specifications:
- Input voltage: DC 12V(3S)
- Power consumption: 1800mW (12V/150mA)
- Camera suitable G3-5D: Canon 5D or similar
- Input format support: 1800mW/ 50HZ/60HZï¼›720P/ 50HZ/60HZï¼›576P/ 50HZ/60HZï¼›480P/ 50HZ/60HZï¼›1080I/ 50HZ/60HZï¼›576I/ 50HZ/60HZï¼›480I/ 50HZ/60HZ
- Output format: NTSC(480I)
- Output resistance: 75Ω
- Work temperature: -20~65°C (-4 ~ 149°F)
- Dimension: 42x32x7mm
Align G3-5D 3-Axis Brushless Gimbal Camera Mount RGG302
Align G3-5D 3-Axis Brushless Gimbal Camera Mount RGG302
Align G3-5D 3-Axis Brushless Gimbal Camera Mount RGG302
Align G3-5D 3-Axis Brushless Gimbal Camera Mount RGG302
Align G3-5D 3-Axis Brushless Gimbal Camera Mount RGG302
Align G3-5D 3-Axis Brushless Gimbal Camera Mount RGG302
  • 0 Units in Stock

Be the first to write a review.  Write a Review.
Safety Tip


This product was added to our catalog on Tuesday 17 March, 2015.

Content

OFFTHEGRIDWATER.CA

Rc-toys Multi Rotor safty Tip Keep your PROPS OFF not installed until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures - realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static - PROPS may start at anytime without warning. Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe. Never ASSUME the props will not start - removing the props removes the risk.



your alt text here