3Axis Gimble 2K 4MP 30X Zoom Camera 2560x1440 Night Vision HDR


$675.80

Add to Cart:


  • Description
  • Details
  • Reviews
  • Custom Tab
Features
* 2K QHD 30X Hybrid Zoom Gimbal Camera
* 10X Optical Zoom 30X Hybrid Zoom
* 400MP CMOS 2K Recording
* 3-AXIS Gimbal Stabilizer High-precision FOC Control
* High Dynamic Range Starlight Niaht Vision Camera
* Applications: Asset Inspection? Fire Control and Rescue? Traffic Monitoring
Product Details
Overall
Model: ZR10
Video Output Port: Ethernet
Control Signal Input Port: S.Bus / PPM / UART / UDP
Power Consumption: 5 W
Dimension: 121*101*78 mm
Weight: 381 g
Waterproof Level: IP53
Angular Vibration Range: ±0.01°
Working Voltage: 11 ~ 25.2 V
Working Temperature: -10 ~ 50 ?
Camera
Lens: 10X Optical Zoom, 3X Digital Zoom
Focal Length: 5.15±5% ~ 47.38±5% mm
Aperture: F1.8 ~ F2.5
Focus: 0.2 m to 8
FOV: Diagonal 79.5°, Horizontal 71.5°
CMOS: 1/2.7”, 4 MP
TF Recording Resolution: 2560*1440 @ 30 fps
Video Storage Bitrate: 12 Mbps
File Storage Format: FAT32
Still Photography Mode: Single
Image Format: JPEG
Video Format: MP (Originally recorded in H.265 file,
converted to MP4 file after reboot)
Metering Mode: Evaluative metering
White Balance: Auto
Supported MicroSD Cards: MicroSD Class10
(Max 32GB, will support 128GB by firmware update)
ZR10
SIYI ZR10 2K 4MP QHD 30X Hybrid Zoom Gimbal Camera with 2560x1440 HDR Night Vision 3-Axis Stabilizer Lightweight for quadcopter
SIYI ZR10 2K 4MP QHD 30X Hybrid Zoom Gimbal Camera with 2560x1440 HDR Night Vision 3-Axis Stabilizer Lightweight for quadcopter
SIYI ZR10 2K 4MP QHD 30X Hybrid Zoom Gimbal Camera with 2560x1440 HDR Night Vision 3-Axis Stabilizer Lightweight for quadcopter
  • 100 Units in Stock

Be the first to write a review.  Write a Review.
Safety Tip

Product 23/169

 Prev 
 All 
 Next 

This product was added to our catalog on Wednesday 20 July, 2022.

Content

OFFTHEGRIDWATER.CA

Rc-toys Multi Rotor safty Tip Keep your PROPS OFF not installed until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures - realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static - PROPS may start at anytime without warning. Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe. Never ASSUME the props will not start - removing the props removes the risk.



your alt text here