Tarot GOPRO Session T-3D Ⅳ Metal 3 Axis Brushless Gimbal GoPro


$162.99

Add to Cart:


  • Description
  • Details
  • Reviews
  • Custom Tab
Features
Tarot ZYX T-3D IV is the latest 3 Axis brushless gimbal designed for GoPro 4 Session from Tarot. With unique internal wiring design, built-in IMU gimbal control module, specialized servo drive module, this gimbal is able to support Pan Follow (PF) mode and First Person View (FPV) mode.This gimbal can work independently.If you have ZYX-M flight controller, connect the gimbal and Tarot ZYX-M Flight Control Module to the DATA/FC channel of gimbal controller through the special cable in main components pack, you will get a better result.
1. Specially designed for GoPro 4 Session 4
2. New design, matal material, different with other gimbals.
3. Special design for GoPro4 Session. Easy and quick to install to the drone. There are two mtel hooks on the gimbal, it can install to the 10mm tube easily by tightening the two self tapping screwscrews easily.
4. The rotation speed is controllable,and the gimbal support PF mode and FPV mode, hele you to seize every corner you want.
Product Details
Input Power: 3S-6S Li (11V-26V)
Working Current: 30mA(@25V)
50mA(@12V)
Stall Current: 350mA(@25V) 700mA(@12V)
Working Environment: -20℃~+50℃
Weight: 153g
Dimensions (with T-3D IV): 80mm*90mm*120mm
Max Controllable Rotation Speed:TILT: ±200 deg/s
ROLL: ±200 deg/s
PAN: ±200 deg/s
Controllable Rotation Range:TILT: -120 deg ~ +80 deg
PAN: -125 deg ~ +125 deg
ROLL: -50 deg ~ +50 deg
Attitude Control Accuracy: ±0.02°
Supported Camera: GOPRO HERO4 SESSION
Assistant Software Supporting Platform:Windows XP/VISTA/7/8
Tarot GOPRO Session 3 Axis Brushless Gimbal

  • 100 Units in Stock

Be the first to write a review.  Write a Review.
Safety Tip


This product was added to our catalog on Wednesday 23 November, 2016.

Content

OFFTHEGRIDWATER.CA

Rc-toys Multi Rotor safty Tip Keep your PROPS OFF not installed until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures - realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static - PROPS may start at anytime without warning. Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe. Never ASSUME the props will not start - removing the props removes the risk.



your alt text here