6S 22.2V 10C 30000mAh Semi-solid State Lipo Battery


$475.00

Add to Cart:


  • Description
  • Details
  • Reviews
  • Custom Tab
Features
The international leading solid-state battery technology enables the battery
to have higher energy density, better safety and longer cycle life(1800cycle).
Advanced intelligent manufacturing plant can guarantee the high consistency of the cell.
Excellent energy density, Stable magnification characteristics, Surging power.
Waterproof treatment, Not afraid of wind and rain.
Our batteries are widely used in fire, inspection, surveying and mapping, and many other fields.
For the same capacity, our batteries are lighter; For the same weight, we have a
higher capacity, so if you use our batteries, you'll get a 20 to 35 percent improvement in flight time.
Product Details
Nominal Capacity:30Ah
Nominal Voltage:3.7V
Charging Voltage:4.2V
Cut-Off Voltage:2.75V
Configuration:6S1P/22.2V Discharge Rate:10C
Net Weight:2.6kg
Dimensions:207mmLength*90mm Width*67mm Height
Connector Type:XT90S-F/AS150-F
Discharge wire:10#/8# AWG
Charging wire:22# AWG
Charge Rate:0.5C-2C Recommended,2C Max
Long Cycle Life:800times (0.5C/0.5C;100% DOD)
500times (0.5C/3C;100% DOD) High-Energy Density:256wh/kg
30000mAh-6S-22.2V
6S 22.2V 10C 30000mAh Semi-solid State Lipo Battery
6S 22.2V 10C 30000mAh Semi-solid State Lipo Battery
6S 22.2V 10C 30000mAh Semi-solid State Lipo Battery
6S 22.2V 10C 30000mAh Semi-solid State Lipo Battery
  • 100 Units in Stock

Be the first to write a review.  Write a Review.
Safety Tip


This product was added to our catalog on Wednesday 20 July, 2022.

Content

OFFTHEGRIDWATER.CA

Rc-toys Multi Rotor safty Tip Keep your PROPS OFF not installed until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures - realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static - PROPS may start at anytime without warning. Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe. Never ASSUME the props will not start - removing the props removes the risk.



your alt text here