QUAD CHANNEL HOTA F6 SMART Charger 10000W 4x15A


$290.00

Add to Cart:


  • Description
  • Details
  • Reviews
  • Custom Tab
Features
HOTA F6 QUAD-CHANNEL SMART Charger 10000W 4*15A For Lipo LiIon NiMH Battery with USB Type-C iPhone Samsung Charging $290
Product Details
Input voltage:DC 10 5-30V
Charge current:0 . 1-15AX4
Regenerated discharge current:0 . 1-15AX 4
Combined charge current:0 . 1-22A
Balance current:1000MA x 4
Discharge current:0 . 1-3AX4
Regenerated discharge power:250wx4 ( 1000w )
Charge power:250W x 4 @ input voltage > 25v
Combined charge power:500W x 2 @ Input voltage > 23v
Discharge power:Internal discharge : 12W x 4 ( bolonce port 6w x 4 )
Battery type:
- LiHV /LiPo / Life/Lilon / Lixx : 1-6S NiZn / - NiCd / NiMH : 1-16S
- Smart Battery : 1-6S
- Leod Acid ( Pb ):1-125 ( 2-24V)
- Eneloop : 1-16S
USB-A output:5V / 21
AType-c output:Maximum 45W
Storage temperature:-20-60°C
Operating temperature:0-40°C
Screen size 28 " IPS 320x240 260.000 colors
Dimension:15mmx12immx46mm
Net weight:475g

HOTA F6 QUAD-CHANNEL SMART Charger 10000W 4*15A For Lipo LiIon NiMH Battery with USB Type-C iPhone Samsung Charging
HOTA F6 QUAD-CHANNEL SMART Charger 10000W 4*15A For Lipo LiIon NiMH Battery with USB Type-C iPhone Samsung Charging
HOTA F6 QUAD-CHANNEL SMART Charger 10000W 4*15A For Lipo LiIon NiMH Battery with USB Type-C iPhone Samsung Charging
HOTA F6 QUAD-CHANNEL SMART Charger 10000W 4*15A For Lipo LiIon NiMH Battery with USB Type-C iPhone Samsung Charging
HOTA F6 QUAD-CHANNEL SMART Charger 10000W 4*15A For Lipo LiIon NiMH Battery with USB Type-C iPhone Samsung Charging
  • 100 Units in Stock

Be the first to write a review.  Write a Review.
Safety Tip


This product was added to our catalog on Monday 26 April, 2021.

Content

OFFTHEGRIDWATER.CA

Rc-toys Multi Rotor safty Tip Keep your PROPS OFF not installed until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures - realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static - PROPS may start at anytime without warning. Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe. Never ASSUME the props will not start - removing the props removes the risk.



your alt text here