50KW BLDC brushless motor 150hp motor


Starting at: $2,300.00

Please Choose:

Sensors









Add to Cart:


  • Description
  • Details
  • Reviews
  • Custom Tab
Express shipping only for this item by DHL Express (cost usually $85 SET)
202/80 motors MP154120 50KW halbach array & ESC available brushless motor 150hp this is preorder for OR new large scale brushless motor can be used for car or airplane Express shipping only by DHL Please contact before you order OEM's welcome
HALBACH ARRAY VERSION AVAILABLE ON REQUEST!
1 x 45-50KW ESC MP154120 BRUSHLESS MOTOR 120V 500A NOT INCLUDED
120v- max240v depends on ESC
The weight is 6.4kg
Power: 40kw-50KW @ 200amp
KV: 28,(35, 50, 70, 80) KV X Voltage=RPM
Resistance: 0.036ohm
No-load currrent: 2A (20v) depends on ESC
Weight: 6.4kg
Torque: 85Nm maximum continual
Thrust: 90-95kg
this is 6 different motors by KV rating, The Kv rating of a brushless motor is the ratio of the motor's unloaded rpm to the peak voltage on the wires connected to the coils. Knowing the Kv rating of a motor will help you determine how fast that motor will rotate when a given voltage is applied to it. (28,35, 50, 70, 80,97) formula ( KV X Voltage=RPM)
Motor IS EXCELLENT FOR full scale ELECTRIC PARA SALE, BIKE, CAR & AIRPLANE 150BHP
MP154120 50KW brushless Halbach Array motor
MP154120 50KW brushless Halbach Array motor
MP154120 50KW brushless Halbach Array motor
MP154120 50KW brushless Halbach Array motor
MP154120 50KW brushless Halbach Array motor
MP154120 50KW brushless Halbach Array motor chart
MP154120 50KW brushless Halbach Array motor chart
  • 99 Units in Stock

Be the first to write a review.  Write a Review.
Safety Tip


This product was added to our catalog on Wednesday 31 May, 2017.

Content

OFFTHEGRIDWATER.CA

Rc-toys Multi Rotor safty Tip Keep your PROPS OFF not installed until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures - realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static - PROPS may start at anytime without warning. Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe. Never ASSUME the props will not start - removing the props removes the risk.



your alt text here