HobbyWing QuickRun Fusion Pro 540 2300KV Brushless Sensory Motor


$170.00

Add to Cart:


  • Description
  • Details
  • Reviews
  • Custom Tab
Features
HobbyWing QuicRun Fusion Pro 540 2300KV Brushless Sensory Motor
Built In 60A ESC 2 in 1 for RC 1/10 Climbing Car
Product Details
Product Name:Quicrun Fusion Pro
Product Number:30120402
Type
- Scale:1/10th
- Brushed/Brushless:BL
- Sensored/Sensorless:SD
- Waterproof:Waterproof
Spcifications
- Cont / Peak Current:60A / 200A
- Input Voltage:2-3S Lipo / 6-9 Cell NIMH
- BEC Output:Switch Mode: 6V / 7.4V, 6A
- Motor KV:2300KV
- Diameter / length of Motor:37mm / 58mm
- Shaft diameter / exposed shaft lengt:3.175mm / 16mm
- Motor Poles:4
Wires & Connectors
- Input Wires:Red-14awg-330mm * 1 / Black-14awg-330mm * 1
- Input Connectors:XT60
( Note : All the wire length above is the original
length not the length you see from the outside.)
ESC Programing via
- SET Button on ESC:Not Supported
- LED Program Box:Supported
- LCD Program Box:Not Supported
- Wifi Module:Not Supported
- Program Port:Independent programming interface (switch position)
Firmware Upgrade:Not Supported
Size:37 * 58mm
Weight:209g (including wires & connectors)
Applications Vehicles:1/10th rock crawler
Item Packing
QuicRun Fusion Pro 540 2300KV Brushless Motor x 1
FUSION-PRO-2300KV
HobbyWing QuicRun Fusion Pro 540 2300KV Brushless Sensory Motor Built In 60A ESC 2 in 1 for RC 1/10 Climbing Car
HobbyWing QuicRun Fusion Pro 540 2300KV Brushless Sensory Motor Built In 60A ESC 2 in 1 for RC 1/10 Climbing Car
HobbyWing QuicRun Fusion Pro 540 2300KV Brushless Sensory Motor Built In 60A ESC 2 in 1 for RC 1/10 Climbing Car
  • 100 Units in Stock

Be the first to write a review.  Write a Review.
Safety Tip


This product was added to our catalog on Saturday 18 June, 2022.

Content

OFFTHEGRIDWATER.CA

Rc-toys Multi Rotor safty Tip Keep your PROPS OFF not installed until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures - realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static - PROPS may start at anytime without warning. Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe. Never ASSUME the props will not start - removing the props removes the risk.



your alt text here