50A Hobbywing Platinum V3 Brushless ESC For 450 450L RC Heli


Add to Cart:

  • Description
  • Details
  • Reviews
  • Custom Tab
Multiple flight mode, a wide range of applicability
Aircraft - Airplane mode
Helicopters - fixed speed off mode
Helicopters - Elf constant speed mode
Helicopters - Storage fixed speed mode
The new fixed speed algorithms , excellent constant speed effect. Excellent slow startup performance , completely eliminating drift phenomenon helicopter startup.
Flameout landing restart time is adjustable, can be manually interrupted flameout landing process and quickly restart the motor , avoid handling errors and crash .
PWM frequency up to 32KHz, the drive motor is running smoother , quieter . The industry's most powerful built-in high-power switch-mode BEC: Platinum-50A-V3: BEC output voltage 5.2V/6.0V/7.4V adjustable output current continues 7A, instant 15A;
Independent of speed (RPM) signal output interface , simplifying without aileron system peripherals
Independent parameters set Interface (Program Port), for connecting multi-function LCD programming box set is not compatible with normal Platinum Card . Independent parameters to set the interface can run real-time status data output power transfer , with data transfer module can be real-time data monitoring and recording . professional electronic engineers can use ESC to run real-time output data to develop more applications.
ESC firmware can be updated online .
Compact and rugged construction .
Product Details
Continuous Current: 50A
Instantaneous Current: 75A
BEC Output: Switching mode, 5.2v/6.0v/7.4v continued 7A, 15A instantaneous Input voltage :2-6s lithium battery section,5-18 nickel-chromium nickel-metal hydride batteries
Parameter programming function
Volume: 48x30x15.5mm (length x width x height)

  • 100 Units in Stock

Be the first to write a review.  Write a Review.
Safety Tip

This product was added to our catalog on Tuesday 12 April, 2016.



Rc-toys Multi Rotor safty Tip Keep your PROPS OFF not installed until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures - realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static - PROPS may start at anytime without warning. Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe. Never ASSUME the props will not start - removing the props removes the risk.

your alt text here