HobbyWing Platinum HV 130A V4 BEC OPTO 6-14S ESC


$353.00

Add to Cart:


  • Description
  • Details
  • Reviews
  • Custom Tab
Features
Hobbywing Platinum HV 130A V4 BEC / OPTO 6-14S Lipo Empty mold Brushless
ESC for RC Drone Helicopters Aircraft
Product Details
Product Name:Platinum HV 130A V4
Product Number:30209200
Type
- Brushed/Brushless:BL
- High Voltage/Regular:High Voltage
Specifications
- Cont./Peak Current:130A/160A
- Input Voltage:6-14S LiPo
- BEC Output:Switch Mode:5-8V,10A
Wires & Connectors
- Input Wires:Red-12AWG-150mm*1/Black-12AWG-150mm*1
- Output Wires:Black-12AWG-100mm*3
- Input Connectors:No
- Output Connecotors:No
(Note: All the wire length above is the original length
not the length you see from the outside.)
ESC Programing via
- Transmitter:Not Supported
- LED Program Card:Not Supported
- LED Program Box:Not Supported
- LCD Program Box:Supported
- WiFi Module:Supported
- OTA Programmer:Supported
- Program Port:Separate Program Port
Firmware Upgrade:Supported
Size:101.0x45.5x27.0mm
Weight:169g
Applications:550-600 Class Heli (Main Blade: 550-690mm)
.90-.140 Class Fixed-wing Airplane, 2m FAIF3A & 3D
EDF (with Diameter?105mm)
Item Packing
Platinum HV 130A V4 Brushless ESC x 1
PL-HV130A-V4
Hobbywing Platinum HV 130A V4 BEC / OPTO 6-14S Lipo Empty mold Brushless ESC for RC Drone Helicopters Aircraft
Hobbywing Platinum HV 130A V4 BEC / OPTO 6-14S Lipo Empty mold Brushless ESC for RC Drone Helicopters Aircraft
Hobbywing Platinum HV 130A V4 BEC / OPTO 6-14S Lipo Empty mold Brushless ESC for RC Drone Helicopters Aircraft
Hobbywing Platinum HV 130A V4 BEC / OPTO 6-14S Lipo Empty mold Brushless ESC for RC Drone Helicopters Aircraft
Hobbywing Platinum HV 130A V4 BEC / OPTO 6-14S Lipo Empty mold Brushless ESC for RC Drone Helicopters Aircraft
  • 100 Units in Stock

Be the first to write a review.  Write a Review.
Safety Tip

Product 65/137

 Prev 
 All 
 Next 

This product was added to our catalog on Saturday 18 June, 2022.

Content

OFFTHEGRIDWATER.CA

Rc-toys Multi Rotor safty Tip Keep your PROPS OFF not installed until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures - realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static - PROPS may start at anytime without warning. Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe. Never ASSUME the props will not start - removing the props removes the risk.



your alt text here