Hobbywing EZRUN MINI28 30A Sensored Brushless ESC


$74.00

Add to Cart:


  • Description
  • Details
  • Reviews
  • Custom Tab
Features
Small size, light weight $74
High power, strong power
Abundance of parameter items
Two profiles
Built-in adjustable BEC
OTA support
The powerful software and hardware are built into the Mini28 ESC.
It features new programmable parameters and is optimized for 1/28 competitions.
High power,
low temperature
The fully-alloy heat sink ensures that the ESC can dissipate
heat and operates at a healthy temperature range while
the maximum output current can be up to 30A
Product Details
Type
- Scale:1/28th - Brushed/Brushless :BL
- Sensored /Sensor less :SD
- Waterproof :No
Specifications
- Cont./Peak Current:30A/80A
- Input Voltage:2S Lipo
- BEC Output:6V/7.4V @Max 3.5A
Wires & Connectors
- Input Wires:Black-20AWG-55mm*1 Red-20AWG-55mm*1
- Output Wires:Black-22AWG-80mm*3 (Note: All the wire length above is the original length not the length you see from the outside.) ESC Programing via
- SET Button on ESC: Not Supported
- LED Program Box: Not Supported
- LCD G2 Program Box :Supported
- OTA Programmer :Supported
- Program Port :Throttle Wire
Firmware Upgrade :Supported
Size & Weight
- Size:22.7x14.2x11.8mm
- Weight:5g (without wires)
Applications
- Motors:1626 Size Motors
- Vehicles:1/28th&1/27th
EZRUN-MINI28
Hobbywing EZRUN MINI28 30A Sensored Brushless ESC Small Size Support Bluetooth Settings For 1/28 GL Racing/Drift Car
Hobbywing EZRUN MINI28 30A Sensored Brushless ESC Small Size Support Bluetooth Settings For 1/28 GL Racing/Drift Car
Hobbywing EZRUN MINI28 30A Sensored Brushless ESC Small Size Support Bluetooth Settings For 1/28 GL Racing/Drift Car
Hobbywing EZRUN MINI28 30A Sensored Brushless ESC Small Size Support Bluetooth Settings For 1/28 GL Racing/Drift Car
  • 100 Units in Stock

Be the first to write a review.  Write a Review.
Safety Tip


This product was added to our catalog on Wednesday 20 July, 2022.

Content

OFFTHEGRIDWATER.CA

Rc-toys Multi Rotor safty Tip Keep your PROPS OFF not installed until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures - realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static - PROPS may start at anytime without warning. Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe. Never ASSUME the props will not start - removing the props removes the risk.



your alt text here