3D Goggle RT-2 5.8G FPV With 3D Cameras For Racing qudcopter


$299.81

 Sold Out 

  • Description
  • Details
  • Reviews
  • Custom Tab
RT-2 is a virtual reality 3D Goggles.It is very good for FPV contest. The most wonderful feature of RT-2 is reality 3D display. RT-2 must be equipped with the 3D binocular camera .Use RT-2, watching the real 3D frames, feeling the word of virtual reality .RT-2 has matched their beautiful FPV view with reliability and adjustability ,from the built-in 32 channel dual diversity 5.8GHz receiver to the IPD and diopter adjustments .
(1).Real 3D display.
(2)Built-in 5.8G 32 channels wireless receiver,compatible with most transmitters.
(3).High transmittance of light,reduce the distortion of frames.
(4).5 inches high definition display screen.
(5).6.8V-24V wide voltage.
(6).Removable eyeglasses.
(7).Adjustable straps.
(8).Double antennas(one is built-in).
(9).Wireless transmission.
(10).Matched with all OSD module.
(11).Great performance of video processor, enhancing the effect of display.
Name
RT-2
RT-2C
Size(mm)
175×120×95
175×120×95
Weight
415g
418g
Screen Size
5 inches
5 inches
Screen Resolution
800×480(75fps)
800×480(75fps)
Display Ratio
16:9
16:9

Pupil Distance

Adjustable
Adjustable
Brightness
400cd/m2 (Adjustable)
400cd/m2 (Adjustable)
Contrast
Adjustable
Adjustable
Saturation
Adjustable
Adjustable
FOV
90°
90°
Antenna port
RP-SMA,50Ω
RP-SMA,50Ω
Frequency
32channels 5.8GHz
32channels 5.8GHz
Sensitivity
 -90dBm
 -90dBm
Video Standard
PAL、NTSC
PAL、NTSC
DC In
 DC 6.8V-24V
 DC 6.8V-24V
Consumption
3.6W
8.4W
Operating Temperature
-20~70℃
-20~70℃
Matched Camera
3D camera
2D、3D camera






  • 0 Units in Stock

Be the first to write a review.  Write a Review.
Safety Tip


This product was added to our catalog on Monday 07 December, 2015.

Content

OFFTHEGRIDWATER.CA

Rc-toys Multi Rotor safty Tip Keep your PROPS OFF not installed until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures - realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static - PROPS may start at anytime without warning. Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe. Never ASSUME the props will not start - removing the props removes the risk.



your alt text here