12.1" FPV monitor for photography


Add to Cart:

  • Description
  • Details
  • Reviews
  • Custom Tab

● The first ground stand HD monitor, designed specially for outdoor users,
   does not have “blue screen”, is your best choice FPV or aerophotography
● High resolution 800*600,contrast ratio 500:1 and brightness 450cd/ ㎡
   (8″),seizing much more clear world
● Multi color format support, enter the menu manually to select the same
   format as your can.
● Analog composite video AV input, connect the aerial camera
● 16:9 aspect ratio, switch the display mode 16:9 and 4:3
● Connect with the camera, as a monitor or secondary monitor of aerial
● High brightness,contrast ratio&Dizzy-proof monitor with sun shade, to see
   clearly under sunshine.
● 1/4-20 thread hole is included in the bottom, easily to mount on the tripod.

 Model:                FPV-121DT
 Brightness:    330cd/m
Resolution:800x600 Pixels
 Contrast:    900:1
 Aspect Ratio:      4:3
 Backlight:     LED
 Viewing Angle: 70°/70°(L/R) 50°/70°(U/D)
 Response time: 30ms
 Support video format:

 NTSC M, PAL M, NTSC BG, PAL N, NTSC DK, PAL DK,                                        


 Power Consumption:≦12W  
 Input Voltage:DC 6V-24V
 Install Way: 1/4 Screw Hole and VESA 100*100mm
 Working Temperature:  -10℃~50℃
 Storage Temperature:  -20℃~60℃  
 Unit Size:

300(L)× 245(W)×45.3(H) mm

 Unit Weight:


  • 100 Units in Stock

Be the first to write a review.  Write a Review.
Safety Tip

This product was added to our catalog on Saturday 20 September, 2014.



Rc-toys Multi Rotor safty Tip Keep your PROPS OFF not installed until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures - realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static - PROPS may start at anytime without warning. Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe. Never ASSUME the props will not start - removing the props removes the risk.

your alt text here