5.8G Adjustable VTX Picture Transmission BETAFPV M03 25-350mW


$23.00

Add to Cart:


  • Description
  • Details
  • Reviews
  • Custom Tab
Features
M03 VTX, a ultralight and high output power 5.8GHz analog VTX, is
designed for 65-85mm whoop drone for longer range flying. Combining
this VTX and the excellent radio link ExpressLRS 2.4G, pilots can
fly whoop drones longer to explore more possibilities and fun.
Bullet Point
With the 25-350mW output power, M03 VTX provides a stable image and strong transmission.
Only 1.1g and tiny size for drones like 65-85mm whoop drones.
The screw mounting holes pattern is suitable with BETAFPV micro canopy.
The camera connector JST-0.8 is suitable with BETAFPV C02 camera.
Comes with IPX type of antenna, just plug and play, no extra solder work needed.
M03 VTX is perfectly suitable for the 65-85mm whoop drone. We highly recommend
to use it with ELRS 2.4G FC board, like F4 1S 5A FC (ELRS 2.4G) or F4 1S 12A FC (ELRS 2.4G).
Product Details
Item: M03 5.8G VTX
Output power: 25/100/200/350mW (adjustable)
Supply voltage range: 4.5-5.5V
Weight: 1.1g (antenna not included)
VTX internal size: 18X14mm
Frequency: 5.8GHz 37 channels, with Race band: 5645~5945MHz
Channel SEL: Smart Audio
Modulation type: FM
Frequency control: PLL
All harmonic: Max -50dBm
Frequency stability: ±100KHz (Typ.)
Frequency precision: ±200KHz (Typ.)
Channel carrier error: ±1.5dB
Antenna port: 50 Ω
Operating temperature: -10℃~+80℃
FPV-M03
BETAFPV M03 25-350mW 5.8G Adjustable VTX Picture Transmission For 65-85mm RC Drones
BETAFPV M03 25-350mW 5.8G Adjustable VTX Picture Transmission For 65-85mm RC Drones
BETAFPV M03 25-350mW 5.8G Adjustable VTX Picture Transmission For 65-85mm RC Drones
BETAFPV M03 25-350mW 5.8G Adjustable VTX Picture Transmission For 65-85mm RC Drones
BETAFPV M03 25-350mW 5.8G Adjustable VTX Picture Transmission For 65-85mm RC Drones
BETAFPV M03 25-350mW 5.8G Adjustable VTX Picture Transmission For 65-85mm RC Drones
BETAFPV M03 25-350mW 5.8G Adjustable VTX Picture Transmission For 65-85mm RC Drones
  • 100 Units in Stock

Be the first to write a review.  Write a Review.
Safety Tip


This product was added to our catalog on Thursday 18 November, 2021.

Content

OFFTHEGRIDWATER.CA

Rc-toys Multi Rotor safty Tip Keep your PROPS OFF not installed until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures - realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static - PROPS may start at anytime without warning. Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe. Never ASSUME the props will not start - removing the props removes the risk.



your alt text here