720P Foxeer Digisight Digital Analog 4ms Latency Super WDR FPV


$62.99

Add to Cart:


  • Description
  • Details
  • Reviews
  • Custom Tab
Features
720P Foxeer Digisight Digital Analog 4ms Latency Super WDR FPV Camera
Product Details
Sensor Type: Sony 1/3" CMOS Sensor
Scale: 4:3(default)/16:9 Switchable
Tv System: PAL(default)/NTSC Switchable
Resolution: Digital 720P/Analog 1000TVL
Shutter Speed: PAL 1/25~1/10000 sec; NTSC 1/30~1/10000 sec
Video Output: 720P Digital HD/CVBS Analog Signal
FOV: Digital: FOV-H:120° FOV-D: 145°
Analog: FOV-H:125° FOV-D: 155°
Shutter Speed: Auto
Minimum Illumination:0.01Lux
White Balance:Auto
DNR:3DNR 2DNR
WDR:120dB
Mode:DAY/CLOUDY/Night/LED
Fast Mode Switch:Long Press Right Button to switch among DAY/CLOUDY/Night/LED
Flight OSD:Cam Title / Voltage (Only in analog) / Time
Input Power:Digital: 3.3V from VTx
Analog: 4.5~20V
Language:ENGLISH/ DEUTSCH/ FRANCAIS/ PYCCKNN/ PORTUGUES/ ESPANOL/ 中文
Working Temperature:-10°~50°C RH90% MAX
Working Humidity:20~80%
Storage Temperature:-20°~70°C
Menu:Analog via camera programming board, Digital via VTx programming board Consumption:Analog: 50mA±15% @ DC12V 115mA±15% @ DC5V
Digital: 350mA@3.3V(Powered by VTX)
Dimension:14*14mm; 19*19mm(Add Bracket)
Weight:4.3g(Exclude cable)
Item Packing
Foxeer Digisight Nano x1
OSD Board x1
2pin OSD Cable x1
Ribbon Cable x1
Bracket x1
Servo Cable x1
(M2x4)Screws x4
Bracket Ring x4
(M2x6)Brachet Screws x4
Detailed Images
720P Foxeer Digisight Digital Analog 4ms Latency Super WDR FPV Camera
720P Foxeer Digisight Digital Analog 4ms Latency Super WDR FPV Camera
720P Foxeer Digisight Digital Analog 4ms Latency Super WDR FPV Camera
720P Foxeer Digisight Digital Analog 4ms Latency Super WDR FPV Camera
  • 100 Units in Stock

Be the first to write a review.  Write a Review.
Safety Tip


This product was added to our catalog on Saturday 12 December, 2020.

Content

OFFTHEGRIDWATER.CA

Rc-toys Multi Rotor safty Tip Keep your PROPS OFF not installed until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures - realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static - PROPS may start at anytime without warning. Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe. Never ASSUME the props will not start - removing the props removes the risk.



your alt text here