8 inch 800x480 Resolution FPV Monitor W/Light Shield+5.8G Receiv


Add to Cart:

  • Description
  • Details
  • Reviews
  • Custom Tab
8 inch 800x480 Resolution FPV Monitor W/Light Shield+5.8G Receive
-Automatic identification of NTSC and PAL double system, optional 16:9 or 4:3 freedom to switch the display mode
-Analog composite video AV input, connect the aerial camera;
-16:9 golden ratio, support 800 * 480 hd resolution;
-Connected to the camera, as a monitor display or aerial auxiliary monitor;
-High brightness, contrast anti-glare screen sun shade collocation, the sun is clearly visible;
-A variety of installation, convenient to different point of view;
-High definition, high brightness, contrast, color and tonal adjustments (tonal only NTSC format can be corrected)
Product Details:
Display: 8 inch TFT LED 1152000 Pixels
The physical resolution: 800 x 480
The highest support resolution: 1920 x 1440
The average brightness: 450 CD / ㎡
Contrast: 500:1
Signal input interface:
Video input, all the way along the way (lotus head RCA audio female head interface)
All the power input (DC 12 v)
Visual Angle: 50 ° / 70 ° 70 °, 60 ° (L/R, U/D)
Video signal input range: 0.7 ~ 1.4 Vp - p / 75 Ω
To support the PC input frequency: H: 30 ~ 60 KHZ V: 60 ~ 75 hz The speaker output power: 250 mw / 8 or more Ω
Video color mode: PAL - 4.43; NTSC - 3.58
Input voltage range: DC12V plus or minus 10 ﹪
The machine power consumption: 8 w or less
Using the environment temperature: - 20 ~ 55 ℃ Storage temperature: - 30 ~ 65 ℃
Appearance size: 208 (W) * 146 (H) * (D) 34 mm
Item Packing
-monitor X 1
-2 db antenna X 1
-12 v 2 a power adapter X 1
-special hood X 1
-with magic X 1
-English instruction X 1

  • 100 Units in Stock

Be the first to write a review.  Write a Review.
Safety Tip

This product was added to our catalog on Friday 09 August, 2013.



Rc-toys Multi Rotor safty Tip Keep your PROPS OFF not installed until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures - realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static - PROPS may start at anytime without warning. Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe. Never ASSUME the props will not start - removing the props removes the risk.

your alt text here