Aomway 5.8G 500mW Video Tx, RX04 Rx and 600TV lines CMOS 5V cam


Add to Cart:

  • Description
  • Details
  • Reviews
  • Custom Tab
The Aomway 5.8G 500mW Transmitter, RX04 Receiver and 600TV lines CMOS 5V camera set is the perfect combo for those that are looking for a high power output set, ideal for long range FPV work in one easy to use package. The 5.8GHz AV receiver is a great accessory for your FPV system! Nice and small in size for easy integration into your ground station, but big on quality and features. The receiver uses the same two button interface, one for the band and one for channel with a bright LCD, making channel swapping a breeze. There are two independent AV outputs for both audio and video. Powering the receiver at the field is as easy as plugging in a 2~6 cell lipoly into the included prewired cable. It just doesn’t get any simpler than this. The Mini 600 TV lines camera with built in microphone is a small but high quality camera made for FPV applications. The camera has a shielded A/V cable and standardized 5 pin connector that is plug and play with most video transmitters. The CMOS FPV tuned sensor is great in all light conditions and even comes with a lens adapter if you want to change the FOV. The video transmitter packs 500mW of ultra clean 5.8GHz power in a conveniently sized and durable video/audio package! Adjustable frequency selection and a selectable 5 or 12 Volt camera power output makes this a must have for those looking for a robust transmitter with good performance. Note: Please check with your local authorities regarding the operation of this equipment before you purchase. Regulations on power output, usable frequencies and licenses’ to operate vary from region to region. Note: For best range and video link stability we recommend using circular-polarized, Patch or Helical Antenna Set (SMA) available below in the accessory’s tab
• Fatshark and Aomway direct matched plug (5V)
• Built in microphone
• Shielded A/V cable
• 600TVL resolution
• Mini Sized at just 15x15x23mm
• Upgraded video circuit and sensitivity, with 500mW telemetry
• Blue semi - transparent shell, more convenient for use
• 5.8GHz band FM audio/video transmit synchro
• Stereo, left/right audio channel independent transmission Receiver
• 5.8GHz receiver (No DVR function), with 32 frequency points covering almost all the frequency band
• Frequency band and frequency point independent display
• Upgraded video circuit and sensitivity, with 500mW telemetry
• 5 db omni antenna
Product Details
Low consumption: 12V 700mA
Power: 500mW/30dBm
Frequency: 15CH, CH1-7, +CH1-8
Built-in two emission frequency: 5740-5860MHz/5705-5945MHz
Format: NTSC/PAL
Wide input voltage: DC7-16V
Output Voltage for CMOS camera operation: 5V or 12V (switch through jumper)
Current: 12V 230mA
Antenna Connection: SMA
Size: 56x27x12mm
Weight: 17g
Image sensor: CMOS
Lens: 2.8mm
TV system : PAL
Horizontal resolution: 600TVL
Picture elements: NTSC
S/N Ratio: >=48 db
Usable illumination: 0.5Lux Scanning system: NTSC:510x492(H),Pal:500x582(V)
Net weight: 13g
Cable length: 25cm
Size: 15x15x5mm
Connector: JST: suit for AOMWAY 5.8G 200mW mini Transmitter Dupont: suit for the AOMWAY 5.8G 1w, 500mW transmitter, Fatshark transmitter, Immersion transmitter. Not for the Boscam transmitter (12v VS 5v) Receiver
Working Frequency: 5740-5860MHz (Fatshark dedicated) / 5705-5945MHz (Universal) 5733-5866MHZ/5725-5865MHZ
Wide input voltage: 7V-16V DC: 12V, 170mA
Channels: 15 transmit channels, CH-1 7channels CH-2 8channel
Sound: Two-channel stereo output
AV Video Output: 2 AV output
Weight: 126g
Size: 80x70x25mm

  • 100 Units in Stock

Be the first to write a review.  Write a Review.
Safety Tip

This product was added to our catalog on Tuesday 14 April, 2015.



Rc-toys Multi Rotor safty Tip Keep your PROPS OFF not installed until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures - realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static - PROPS may start at anytime without warning. Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe. Never ASSUME the props will not start - removing the props removes the risk.

your alt text here