Caddx ANT 1200TVL 1.8mm Ultra Light 16:9 WDR OSD


$24.00

Add to Cart:


  • Description
  • Details
  • Reviews
  • Custom Tab
Features
Caddx ANT 1200TVL Global WDR OSD 1.8mm Ultra Light FPV Nano Camera 16:9 for RC FPV Tiny whoop Cine whoop Toothpick Mobula6
Product Details
Model:Caddx Ant
Image Sensor:1/3" CMOS Sensor
Horizontal Resolution:1200 TVL
TV System:NTSC or PAL
MENU:Support
IMAGE:16:9
Synchronization:Internal
Electronic Shutter:PAL: 1/50~100,000; NTSC: 1/60~100,000
S/N Ratio :>52dB (AGC OFF)
Video Output:CVBS
Lens:1.8mm
Min. Illumination:0.001Lux@F1.2
Auto Gain Control:YES
BLC:YES
WDR:Global WDR
DNR:3D DNR
Dimensions:14*14mm(with bracket to 19*19mm)
Wide Power Input:DC 3.7-18V
Work Temperature:-20℃~+60℃
Work Humidity:20%~80%
Weight:2g (N.W.)

Caddx ANT 1200TVL Global WDR OSD 1.8mm Ultra Light FPV Nano Camera 16:9 for RC FPV Tinywhoop Cinewhoop Toothpick Mobula6
Caddx ANT 1200TVL Global WDR OSD 1.8mm Ultra Light FPV Nano Camera 16:9 for RC FPV Tinywhoop Cinewhoop Toothpick Mobula6
Caddx ANT 1200TVL Global WDR OSD 1.8mm Ultra Light FPV Nano Camera 16:9 for RC FPV Tinywhoop Cinewhoop Toothpick Mobula6
Caddx ANT 1200TVL Global WDR OSD 1.8mm Ultra Light FPV Nano Camera 16:9 for RC FPV Tinywhoop Cinewhoop Toothpick Mobula6
Caddx ANT 1200TVL Global WDR OSD 1.8mm Ultra Light FPV Nano Camera 16:9 for RC FPV Tinywhoop Cinewhoop Toothpick Mobula6
Caddx ANT 1200TVL Global WDR OSD 1.8mm Ultra Light FPV Nano Camera 16:9 for RC FPV Tinywhoop Cinewhoop Toothpick Mobula6
Caddx ANT 1200TVL Global WDR OSD 1.8mm Ultra Light FPV Nano Camera 16:9 for RC FPV Tinywhoop Cinewhoop Toothpick Mobula6
  • 100 Units in Stock

Be the first to write a review.  Write a Review.
Safety Tip


This product was added to our catalog on Saturday 03 April, 2021.

Content

OFFTHEGRIDWATER.CA

Rc-toys Multi Rotor safty Tip Keep your PROPS OFF not installed until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures - realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static - PROPS may start at anytime without warning. Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe. Never ASSUME the props will not start - removing the props removes the risk.



your alt text here