Caddx Polar Vistaigital Image Tx HDDigital cam for DJI GogglesV2


$199.99

Add to Cart:


  • Description
  • Details
  • Reviews
  • Custom Tab
Features
The CADDXFPV air Unit is an advanced video transmission modulethat supports a
5.8 GHZ digital video signal and 720p 120fps image transmission, with a
transmission range of up to 4 km and a minimum end-to-end latency within 28 ms.
The air unit can be mounted on a racing drone and used with DJI FPV Goggles or
a remote controller to transmit video, control signals, and flight controller
information wirelessly.
Product Details
MODLE: Polar Vista Kit
Weight: Vista Kit (camera included):28g; Antenna: 1.5g
Dimensions: Vista Kit: 30x29x13mm; Camera: 19x19x24mm; Coaxial Cable: 120mm
Operating Frequency: 5.725-5.850GHZ
Transmitter Power (ERP): FCC/SRRC/MIC: < 30dbm; CE: < 14d Bm
Min.latency (end-to-end): 720p 60fps: < 32ms
Max.Transmission Distance: FCC/SRRC: 4km; CE:0.7km
I/0 Interface: USB-C, IPEX, 3-in-lport
Supported Flight control System: F3.F4 . F7
Operating Temperature Range: 32°to104°F( 0°to40°C)
Input Power: 7.4-26.4V
Power Outout: 25mw/200mw/500mw/ 700mw
Hardware Included: Polar vista kit / m2 screw / Gasket Ring Menu cable
/ 3-in-1 cable / coaxial-cable / antenna
Goggles: Work with DJI goggles
Camera: Sensor: 1/1.8" starlight cmos; Min Illumination: 0.00003LUX; Lens:
F/1.6 & 8 Mega; Shutter: Rolling shutter; IS0: 100-25600; FOV: 162°
(D):138°(H):75°(V); Aspect Ratio: 16:9
CADDX-VISTA
Caddx Polar Vista Kit FPV Digital Image Transmission HD Digital Starlight Camera for DJI Goggles V2
Caddx Polar Vista Kit FPV Digital Image Transmission HD Digital Starlight Camera for DJI Goggles V2
Caddx Polar Vista Kit FPV Digital Image Transmission HD Digital Starlight Camera for DJI Goggles V2
Caddx Polar Vista Kit FPV Digital Image Transmission HD Digital Starlight Camera for DJI Goggles V2
Caddx Polar Vista Kit FPV Digital Image Transmission HD Digital Starlight Camera for DJI Goggles V2
  • 100 Units in Stock

Be the first to write a review.  Write a Review.
Safety Tip


This product was added to our catalog on Thursday 02 September, 2021.

Content

OFFTHEGRIDWATER.CA

Rc-toys Multi Rotor safty Tip Keep your PROPS OFF not installed until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures - realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static - PROPS may start at anytime without warning. Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe. Never ASSUME the props will not start - removing the props removes the risk.



your alt text here