Foxeer Arrow Micro Pro 600TVL FPV CCD Camera


$29.00

Add to Cart:


  • Description
  • Details
  • Reviews
  • Custom Tab
Features
Foxeer Arrow Pro Micro Camera, Tremendously small and light,
yet extremely capable and at a better price point!
Coming in at only 5.3 grams makes it even lighter than the
Runcam Swift Micro Camera and has been upgraded with lighter
color, more natural image, and better saturation as opposed
to the previous version of the Foxeer Arrow Micro.
This camera is a great option for any one wanting the
best performance out their micro build.
Product Details
Solution:Sony 1/3" CCD Sensor + Nextchip 2040 DSP
Camera Color:Red
Pixel:NTSC: 768*494
Tv System:NTSC
Resolution:600YVL(Color)
Synchronization:Internal
Video Output:CVBS Analog Signal
FOV:1.8mm FOV: 160°
Shutter Speed:Auto
Minimum Illumination:0.01Lux
WDR:DWDR 90dB
DNR:2D DNR
OSD Programming Board:Support
DAY/NIGHT:EXT/Auto/Color/B&W
Flight OSD:Name Voltage Time
Input Voltage:5V~40V
Power Consumption:75mA/12V 166mA/5V
Working Temperature:-10°~50°C RH90% MAX
Working Humidity:20~80%
Storage Temperature:-20°~70°C
Dimension:19*19mm
Weight:5.3g(Exclude cable)
1 X Camera
1 x Manual
1 x OSD board
1 x servo cable
1 x bracket
FO-HS1209-RE
Foxeer Arrow Micro Pro 600TVL FPV CCD Camera with OSD 1.8mm Lens NTSC For FPV Racing Drone Red
Foxeer Arrow Micro Pro 600TVL FPV CCD Camera with OSD 1.8mm Lens NTSC For FPV Racing Drone Red
Foxeer Arrow Micro Pro 600TVL FPV CCD Camera with OSD 1.8mm Lens NTSC For FPV Racing Drone Red
Foxeer Arrow Micro Pro 600TVL FPV CCD Camera with OSD 1.8mm Lens NTSC For FPV Racing Drone Red
Foxeer Arrow Micro Pro 600TVL FPV CCD Camera with OSD 1.8mm Lens NTSC For FPV Racing Drone Red
Foxeer Arrow Micro Pro 600TVL FPV CCD Camera with OSD 1.8mm Lens NTSC For FPV Racing Drone Red
  • 100 Units in Stock

Be the first to write a review.  Write a Review.
Safety Tip


This product was added to our catalog on Tuesday 28 September, 2021.

Content

OFFTHEGRIDWATER.CA

Rc-toys Multi Rotor safty Tip Keep your PROPS OFF not installed until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures - realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static - PROPS may start at anytime without warning. Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe. Never ASSUME the props will not start - removing the props removes the risk.



your alt text here