Foxeer Arrow v3 HS1195 Built-in OSD FPV Race Camera (Upgraded HS


$35.99

Add to Cart:


  • Description
  • Details
  • Reviews
  • Custom Tab
Features Foxeer Arrow V3 Blue addition version, upgraded metal case, perfect design, it supports 5~40V input voltage, built-in OSD(voltage, time, name), voltage detection, flexible OSD programming cable. FOXEER ARROW V3 is the advanced version of FOXEER HS1177, it features great WDR and brilliant image quality. The camera case is made of light metal, which can better survive from vibrations and crashes. Inbuilt MIC, makes the flying experience more immersive ** Note : The metal case can not fit previous version of Arrow camera , it might be burned, please pay attention. ** Product Details CCD : 1/3 Sony SUPER HAD II CCD Pixel : PAL: 976(H) x 494(V) TV System : PAL Resolution : 650TVL(b/w), 600tvl(color) OSD : Edit Name, Power, Flying time Synchronization : internal synchronize Shutter Speed : (CCD IRIS) PAL: 1/50~1/100000 sec
Noise > 60 (AGC OFF)
Video Out 75ohm, synchronize
Min. Illumination 0.01Lux
Auto Gain Off/Low/Mid/High
Back Light Compensation (BLC) Off /Back light compensation/ Strong light suppression
Private shading (PRIVACY) 1~8 private shading area
Motion Detection (MD) On/ Off (Multi level sensitivity settable)
Auto White Balance Manual / Auto / Auto track
Mirror Horizontal Mirror optional
Negative Positive / Negative optional
Color to B&W Auto
DNR 2DNR
WDR D-WDR
Day / Night Shift Auto/ Color/ B&W
Menu (OSD) English menu
White Dot Repair Support
Image Adjustment Support
Camera Title Support
Power Requirement DC5V~35V
Working Temperature -10 C ~ 50 C
Working Humidity 20~80%
Storage Temperature -40 C ~ 60 C
Storage Humidity 20~95%
Dimensions(mm) 26X26(W*L)
Power Consumption 70mA
FOXEER Arrow V3 2.5mm
IR Blocked version will be sent by default . Please let us know if you want IR sensitive
Foxeer Arrow v3 HS1195 Built-in OSD FPV Race Camera (Upgraded HS1190)
  • 100 Units in Stock

Be the first to write a review.  Write a Review.
Safety Tip


This product was added to our catalog on Wednesday 21 June, 2017.

Content

OFFTHEGRIDWATER.CA

Rc-toys Multi Rotor safty Tip Keep your PROPS OFF not installed until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures - realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static - PROPS may start at anytime without warning. Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe. Never ASSUME the props will not start - removing the props removes the risk.



your alt text here