HOBBYWING XERUN XR8 Plus G2S 200A/980A ESC 2-6S


$260.00

Add to Cart:


  • Description
  • Details
  • Reviews
  • Custom Tab
Features
HOBBYWING XERUN XR8 Plus G2S 200A/980A ESC 2-6S Brushless Speed Controller for 1/8 RC Racing Car On-Road Off-Road Truggy
Product Details
Product Name: Xerun XR8 Plus G2S
Type
- Scale: 1/8th
- Brushed/Brushless: BL
- Sensored/Sensorless: SD
- Waterproof: No
Specifications
- Cont./Peak Current: 200A/1080A
- Input Voltage: 2-6S Lipo
- BEC Output: 6-8.4V Adjustable, Continuous/Peak Current : 6A/15A (Switch-mode)
Wires & Connectors
- Wires & Connectors: Black-11AWG-200mm*2
- Output Wires: Black-11AWG-200mm*3
- Input Connectors: No
- Output Connectors: No
Fan
- Size: 30x30x10mm
- Voltage Range: 5-8.4V
- Powered by: Powered by BEC
ESC Programing via
- SET Button on ESC: Not Supported
- LED Program Box: Not Supported
- LCD Program Box: Supported
- OTA Programmer: Supported
- Programming Port: Independent programming port
Firmware
- Firmware Upgrade: Supported
Size & Weight
- - Size: 56.1mmx42.1mmx38.5mm
Weight: 122g (w/wires)
Applications
- Applications: SL BL Motors / SD BL Motors
- Vehicles: 1/8th On-Road/Off-Road/Truggy Racing
- KV Rating/T Count: 4S LiPo:4268/4274≤3000KV / 6S LiPo:4274≤2400KV
XERUN XR8 Plus G2S 200A/980A ESC x 1
XR8-PLUS-G2S
HOBBYWING XERUN XR8 Plus G2S 200A/980A ESC 2-6S Brushless Speed Controller for 1/8 RC Racing Car On-Road Off-Road Truggy
HOBBYWING XERUN XR8 Plus G2S 200A/980A ESC 2-6S Brushless Speed Controller for 1/8 RC Racing Car On-Road Off-Road Truggy
HOBBYWING XERUN XR8 Plus G2S 200A/980A ESC 2-6S Brushless Speed Controller for 1/8 RC Racing Car On-Road Off-Road Truggy
HOBBYWING XERUN XR8 Plus G2S 200A/980A ESC 2-6S Brushless Speed Controller for 1/8 RC Racing Car On-Road Off-Road Truggy
  • 100 Units in Stock

Be the first to write a review.  Write a Review.
Safety Tip


This product was added to our catalog on Friday 15 April, 2022.

Content

OFFTHEGRIDWATER.CA

Rc-toys Multi Rotor safty Tip Keep your PROPS OFF not installed until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures - realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static - PROPS may start at anytime without warning. Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe. Never ASSUME the props will not start - removing the props removes the risk.



your alt text here