SpeedyBee Bluetooth-USB Adapter 2-6S Support STM32


$28.00

Add to Cart:


  • Description
  • Details
  • Reviews
  • Custom Tab
Features
- 2S - 6S Power Input
2s-6s power input, at the same time, the Micro USB interface supplies power to the flight controller
(*A battery can simultaneously power the Bluetooth module and the flight controller)
- Support USB Connector
Support STM32/Cp210x USB Connector, compatible with most flight controllers
- Speedybee App
Using with SpeedyBee APP, the most convenient Mobile Ground Station!
iOS Device: for iPhone 4S, for iPad 3rd Gen and later
iOS 10.0+ : for APP Store
Android 4.3+: Google Play, Download
- More Stable and Faster Transmission Performance
Low-Power Bluetooth Solution
Standalone Transmission Control Chip
1KB Data Cache Expansion
- No Configuration Required, plug and play
Product Details
Brand Name: SpeedyBee
Item Name: Bluetooth-USB Adapter
Output Power: 0 dBm
Receiver Sensitivity: -94 dBm
Transmission Rate: Bidirectional 2K/S
Bluetooth Protocol: 2Bluetooth Specification V4.0 BLE
Transmission Distance: 10m
Frequency Range: 2400 MHZ - 2483.5MHZ (2.4G ISM Band)
Baud Rate: 19200
USB to Serial Port Baud Rate: 115200
Operating Voltage: 2-6S LiPo (6 - 30V)
Minimum Operating Current: 20mA
The Operating Current When Connecting The FC: 80mA
Dimension: 42*20*5.6mm
Net Weight: 3.5g

Hot New SpeedyBee Bluetooth-USB Adapter 2-6S Support STM32 Cp210x USB Connecter For RC Racing Drone Flight Controller Spare Part
Hot New SpeedyBee Bluetooth-USB Adapter 2-6S Support STM32 Cp210x USB Connecter For RC Racing Drone Flight Controller Spare Part
Hot New SpeedyBee Bluetooth-USB Adapter 2-6S Support STM32 Cp210x USB Connecter For RC Racing Drone Flight Controller Spare Part
Hot New SpeedyBee Bluetooth-USB Adapter 2-6S Support STM32 Cp210x USB Connecter For RC Racing Drone Flight Controller Spare Part
  • 100 Units in Stock

Be the first to write a review.  Write a Review.
Safety Tip


This product was added to our catalog on Wednesday 14 April, 2021.

Content

OFFTHEGRIDWATER.CA

Rc-toys Multi Rotor safty Tip Keep your PROPS OFF not installed until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures - realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static - PROPS may start at anytime without warning. Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe. Never ASSUME the props will not start - removing the props removes the risk.



your alt text here