Walksnail Avatar HD Camera VTX Kit 1080P 170°FOV Lower Latency


$208.99

Add to Cart:


  • Description
  • Details
  • Reviews
  • Custom Tab
Features
Lower latency than the competitor at an average of 22ms
Built-in 8Gb Internal Storage
1080p Screen Resolution
Switchable Aspect Ratio
Dual Antenna Design
5.8GHz Frequency
Onboard DVR
Canvas Mode
4km Range
170° FOV
6V-25.2V
Product Details
AVATAR HD CAMERA
Resolution: 1080p 60FPS / 720P 120FPS / 720P 60FPS
Aspect Ration: 16/9 and 4/3 Switchable
Minimum Illumination: 0.001Lux
Shutter Style: Rolling Shutter
Dimensions: 19x19x22mm
Cable Length: 140mm
Image Sensor: 1/27"
Field Of View: 170°
Aperture: F 2.0
Lens: 2.1mm
Weight: 6g
AVATAR VTX
Transition Power: FCC<30dBm / CE <14dBm / SRRC <20dBm / MIC <25dB
Operational Frequency: 5.725-5.850GHz
Operating Temperature: -20° to 40°
Supported FC Firmware: Betaflight
USB Connection: JST x 4 to USB-A
Video Resolution: 1080p / 720p
FC Connection Port: JST1.0 x 6
Dimensions: 33x33x9.5mm
Antenna Connector: U.fl
Latency: 22ms Average
Input Voltage: 6-25.2V
Internal Storage: 8GB
Mounting: 25x25mm
Weight: 16g
Channels: 8
AVATAR ANTENNAS
Radiation Efficiency: >= 98%
Bandwidth: 5.6-5.9GHz
Gain: 2dBi Average
Polarization: LHCP
Connector: U.fl
Length: 90mm
VSWR: <=1.4
Weight: 1.5g
WAL-170FOV
Walksnail Avatar HD Camera / VTX Kit 1080P 170°FOV Lower Latency Onboard DVR 4KM Range for Avatar FatShark HD Dominator
Walksnail Avatar HD Camera / VTX Kit 1080P 170°FOV Lower Latency Onboard DVR 4KM Range for Avatar FatShark HD Dominator
Walksnail Avatar HD Camera / VTX Kit 1080P 170°FOV Lower Latency Onboard DVR 4KM Range for Avatar FatShark HD Dominator
Walksnail Avatar HD Camera / VTX Kit 1080P 170°FOV Lower Latency Onboard DVR 4KM Range for Avatar FatShark HD Dominator
  • 100 Units in Stock

Be the first to write a review.  Write a Review.
Safety Tip


This product was added to our catalog on Tuesday 02 August, 2022.

Content

OFFTHEGRIDWATER.CA

Rc-toys Multi Rotor safty Tip Keep your PROPS OFF not installed until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures - realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static - PROPS may start at anytime without warning. Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe. Never ASSUME the props will not start - removing the props removes the risk.



your alt text here