HD 6S Nazgul5 with Walksnail Avatar HD FPV Goggles ELRS RTF


$1,457.99

Add to Cart:


  • Description
  • Details
  • Reviews
  • Custom Tab
Features
Nazgul5 HD 6S with Walksnail Avatar HD FPV Goggles ELRS RTF controller
Nazgul5 HD is a 5" size BNF (Bind-and-Fly) quadcopter with Caddx Vista
Digital HD System on it. We sticked the lighter Caddx Vista on one of
our new updated XL5 V5 FPV frames. Pre-tuned and setup, everything you
need is just bind-and-fly! Loads of power and smooth flights guaranteed
using our popular XING-E motors with long-lasting NSK bearings.
Got a hard hit and snapped an arm? Don't worry, get some spares with your
order and easy-swap out in field. Wanna strap your GoPro on that beast as well?
Checkout our collection of high quality TPU prints for your cam!
- 5mm arm design for more durability
- Easy-Swap arms
- LED illuminated Logo
- XING-E 2207 motors and NAZGUL 5140 props
- 5" version also fits 5.1" style propellers
- Popular True-X configuration
- TPU crash-guards
- Fits both 30.5x and 20x stacks
Product Details
Nazgul5(XL5 V5) frame specs:
BLITZ F7 Flight Controller
BLITZ E45S 4-IN-1 45A 2-6S ESC
XING-E 2207 FPV Motor (6S 1800kv / 4S 2750kv)
Wheelbase: 240mm*240mm
Body size: 170*170mm
Propeller size: 5 inch /5.1 inch
FC pattern: 30.5*30.5/20*20 mm
FPV cam spacing: 19mm
Weight: 400.8g (without battery)
FC // BLITZ F7 Flight Controller V1.1 (SKU: BF12083)
MCU: STM32 F722
Gyro: BMI270
Barometer: DPS310
OSD Chip: AT7456E
Flash: 32MB (Blackbox flash)
UARTS: 6
Motor outputs: 4x (SH1.0 connector)
I2C serial: SDA / SLA pads
Smartaudio / IRC Tramp VTX protocol supported
LED controller: Yes
Beeper pad: Yes
Firmware target: IFRC-IFLIGHT_BLITZ_F722
Mount pattern: 30.5*30.5mm / 4mm PCB hole diameter
Dimensions: 36.5*35 mm
Weight: 7.8g
ESC // BLITZ E45S 4-IN-1 45A 2-6S ESC
- Supports: DShot150/300/600/MultiShot/ OneShot etc.
- Mounting Holes: 30.5*30.5mm/F4mm
- Supports 2-6S lipo input
- Telemetry Output: NO
- Target: Q-H-25 16.7
- Current sensor: Yes
- Constant: 45 Amps
- Current rate: 200
- Burst: 55 Amps
- Weight: 14.7g
- MCU: BB21
- BEC: NO
Commando8 Specification:
ELRS module: ExpressLRS 915MHz or 2.4GHz (inbuilt in back of the radio)
- 915MHz system: SX1276
- 2.4GHz system: SX1280
BASE 2.4G Module:
- Supported Protocols: Futaba S-FHSS/Frsky D16/Frsky D8
- 2.4GHz system: CC2500
Antenna options:
- Dual-Band (915MHz+2.4GHz)
- Single-Band (915MHz)
- Single-Band (2.4GHz)
Control interface:
- 2x 2-position switches (can be used for arming; not momentary)
- 2x 5-axis menu buttons for full OpenTX or EdgeTX control
- 2x 3-position switches
RF Power:
- ExpressLRS 915MHz // Max Output 1000mW
- ExpressLRS 2.4GHz // Max Output 500mW
- Input: Mini High Precision Hall Gimbals with NMB bearings
- Battery: Built-in 4000mAh 1S2P 18650 Battery
- Charging: Type-C 20W Quick Charge
- Charging Connector: Type-C
- Radio Channels: 8
- Weight: 310g
Walksnail Avatar Digital HD FPV Goggles Specification:
OPTIC ENGINE
- Inter-Pupillary Distance (IPD): 57 ~ 70mm (adjustable)
- Adjustable Focus Range: +2 to -6 diopter
- Field of View (FOV): 46°
MICRO DISPLAYS
- Full HD 1080p OLED Dual Micro Displays
INPUT VOLTAGE
- 7-21V (2S-5S)
FEATURES
- Customizable Fit with Optional Faceplate Pad Accessories
- HD Video Output via USB-C Connector
- Supports Betaflight Canvas Mode
- Adjustable Anti-Fog Ventilation
- On/Off Power Button
- Integrated HD DVR
BNF // Parts lists
1x Prebuilt and tested Quadcopter
1x Walksnail Avatar Digital HD FPV Goggles
1x Nazgul5(XL5 V5) Frame
1 x Commando 8 Radio Transmitter-ELRS (2.4G/915Mhz as optional)
2x Crystal LHCP Short Omni Antennas
2sets x Nazgul 5 inch 3-blades (Set of 4 - Color may vary)
1x 20*200mm Microfiber PU Leather Battery Strap (Color May Vary)
1x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)
Nazgul5 HD 6S with Walksnail Avatar HD FPV Goggles ELRS RTF controller
  • 100 Units in Stock

Be the first to write a review.  Write a Review.
Safety Tip


This product was added to our catalog on Friday 19 August, 2022.

Content

OFFTHEGRIDWATER.CA

Rc-toys Multi Rotor safty Tip Keep your PROPS OFF not installed until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures - realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static - PROPS may start at anytime without warning. Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe. Never ASSUME the props will not start - removing the props removes the risk.



your alt text here