Y-16 Agro 16L Hybrid Electric Agricultural Spraying Drone


$5,500.00

Add to Cart:


  • Description
  • Details
  • Reviews
  • Custom Tab
Features
RichenPower Y-16 Agri 16L Hybrid Electric Agricultural Spraying Drone With Water Tank 20 mins Flight Time
Product Details
Total Weight (Excluding fuel) (kg):22
Max Takeoff Weight (kg):38
Max Hovering Time (minutes):18
GNSS+Positioning System Hovering Accuracy (cm)
GNSS* GPS+GLONASS+BEIDOU:Horizental±60 vertical±30 radar modular enabled±10
Dimensions (L x W x H) (mm):600 x 680 x 700 (Frame arms folded)
;1200 x 1200 x 700 (Frame arms unfolded)
Diagonal Wheelbase (mm):1568
Number of Arms:4
Max Operating Speed (m/s):7
Max Flying Speed (m/s):10
Fuel Consumption (liter/ hour):4
Operating Temperature (°C):-20 ~ 40
Max Service Ceiling Above Sea Level (m):2000
Press to Start:yes
Gasoline:Regular92 or E92 or above
FPV Camera:FOV Horizontal 98°Vertical78°Resolution1080x960
Liquid Tank Volume (liter):Standard 16; Max 17
Liquid Tank Payload (kg):Standard 16; Max 17
Number of Nozzle:2
Nozzle Model:Teejet XR11001VS or German Agro11001 (Droplet Size 130~250 µm)
Max Spray Flow (liter/min):1.8 (ISO 005 nozzle), 3.6 (ISO 040 nozzle)
Spray Width (m):6~10 m ( 2nozzles, at a height of 1.5~3 m above crops)
Terrain Follow Radar:Altitude detection range 1 - 30 m;
Stabilization working range 1.5 - 15 m; Max slope in Mountain mode 35°
Pellet Tank Volume (liters):20
Max. Pellet Spreader Rate (kg/min):60
RIC-Y16
RichenPower Y-16 Agri 16L Hybrid Electric Agricultural Spraying Drone With Water Tank 20 mins Flight Time
RichenPower Y-16 Agri 16L Hybrid Electric Agricultural Spraying Drone With Water Tank 20 mins Flight Time
RichenPower Y-16 Agri 16L Hybrid Electric Agricultural Spraying Drone With Water Tank 20 mins Flight Time
  • 100 Units in Stock

Be the first to write a review.  Write a Review.
Safety Tip


This product was added to our catalog on Tuesday 29 March, 2022.

Content

OFFTHEGRIDWATER.CA

Rc-toys Multi Rotor safty Tip Keep your PROPS OFF not installed until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures - realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static - PROPS may start at anytime without warning. Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe. Never ASSUME the props will not start - removing the props removes the risk.



your alt text here