ToolkitRC ST8 2.4in TFT 7-28V 8-channel Servo Integrated Tester


$89.99

Add to Cart:


  • Description
  • Details
  • Reviews
  • Custom Tab
Features
Using Steps:
① Connect 7-28V power supply,After power-on, the LCD screen displays the logo and continues 2 seconds, with the starting music;
② Press "EXIT" button to test PWM signal;
③ Totate the Button to choose different channel and press "EXIT" to confirm;
④ Long-press the "OK" button(2s) to entra system setting;
⑤ Press "EXIT" to finish setting;
Features:
- ToolkitRC ST8 is a data analyzer which is capable to test the voltage, power, current, speed and signal data of the servo.
- With 4-way independent programable signal, 8 channel signal output, the precision is accurating to 1us.
- 4-way independent current date collection, and diplayed by graph.
- Support to test multipul date, speed, liner data, steps,etc.
- Support multiple signal type, PWM/PPM/SBUS,the precision is accurating to 1us.
- Input Voltage is higher to 28V, also suitable to test HV servo.
- The max load is upto 100W.
- Multi-language system, can change the language by yourself.
- USB firmware update, easy to operate.
Note:
- S1-S4, S4 EXT signal interface support MAX 2A current, please connect to main interface when the current of servo is higher than 2A.
- S1-S4 signal interface support MAX 8.4 voltage, please connect to main interface when the voltage of servo is higher than 2A.
Product Details
Input voltage: 7.0-28.0V @MAX 10A
Main output port: 5.0V-28.0V@MAX 10A
Signal port: 5.0V-8.4V@MAX 4A/S1-S4
Output voltage: 5.0V-8.4V@MAX 4A/S4 Ext.
Output signal: 100us-2900us@33-1000Hz @S1-S4
S5 Input signal: PWM 500us-2500us@S5
PPM 8CH@S5 SBUS 16CH@S5
P1 rotation range: 1000us-2000us@P1
MicroUSB: Upgrade@USB3.0
LCD display: 2.4 inch TFT RGB 320*240 resolution
Dimensions: 99mm*68mm*26mm
Weight: 120g
Item Packing
16
ToolkitRC ST8 2.4in TFT 7-28V 8-channel Servo Integrated Tester 4
ToolkitRC ST8 2.4in TFT 7-28V 8-channel Servo Integrated Tester 4
ToolkitRC ST8 2.4in TFT 7-28V 8-channel Servo Integrated Tester 4
  • 100 Units in Stock

Be the first to write a review.  Write a Review.
Safety Tip


This product was added to our catalog on Wednesday 16 September, 2020.

Content

OFFTHEGRIDWATER.CA

Rc-toys Multi Rotor safty Tip Keep your PROPS OFF not installed until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures - realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static - PROPS may start at anytime without warning. Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe. Never ASSUME the props will not start - removing the props removes the risk.



your alt text here