Radiolink AT9 2.4GHz 9 Channel Transmitter Radio & Receiver


$120.00

Add to Cart:


  • Description
  • Details
  • Reviews
  • Custom Tab
Features
AIRCRAFE” model type added
Programmable mix control
Vibration alarm
2.8 inches LCD
Data telemetry
3ms quick response
Chinese & English menu
Support S-BUS
Great performance in anti-interference
Nine channel with full function
Support USB online updated
Mini receiver
Product Details
1 Size: 183*193*100mm
2 Weight: 0.88kg
3 Frequency: 2.4GHz ISM band (2400MHz to 2485MHz)
4 Modulation mode: QPSK
5 Channel bandwidth: 5.0MHz
6 Spread spectrum: DSSS
7 Adjacent channel rejection: >38dbm
8 Transmitter power: <100mW(PCB testing), <20dbm(3 meter air testing)
9 Operating Current: <105mA
10 Operating Voltage: 7.4~15V
11 Control distance: more than 900 meters ground, 1.5kms air
12 Channel: 9 channels, 5~9 channels are customizable
13 Simulator model: under the simulator model the transmitter action turn off, change to power saving model
14 Screen: 2.8 inches 16 colorful screen , 240*320 pixels
15 Compatible model: Include all 120 degree and 90 degree swashplate helicopter, all fix wing and glider, five flying model and aircraft
Item Packing
-Radiolink AT9 2.4GHz 9 Channel Transmitter Radio & Receiver for RC Hobby Mode 2 X 1
Radiolink AT9 2.4GHz 9 Channel Transmitter Radio & Receiver for RC Hobby Mode 2 X 1 Radiolink AT9 2.4GHz 9 Channel Transmitter Radio & Receiver for RC Hobby Mode 2 X 1 Radiolink AT9 2.4GHz 9 Channel Transmitter Radio & Receiver for RC Hobby Mode 2 X 1 Radiolink AT9 2.4GHz 9 Channel Transmitter Radio & Receiver for RC Hobby Mode 2 X 1
  • 100 Units in Stock

Be the first to write a review.  Write a Review.
Safety Tip


This product was added to our catalog on Wednesday 22 April, 2015.

Content

OFFTHEGRIDWATER.CA

Rc-toys Multi Rotor safty Tip Keep your PROPS OFF not installed until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures - realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static - PROPS may start at anytime without warning. Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe. Never ASSUME the props will not start - removing the props removes the risk.



your alt text here