Radiolink R6FG V4 2.4GHz 6 CH FHSS Receiver High Voltage Gyro


$19.00

Add to Cart:


  • Description
  • Details
  • Reviews
  • Custom Tab
Features
Excellent Anti-interference: pseudo random algorithm FHSS communication technology makes $19
R6FG with stable signal and. outstanding range over 1300 feet (400 meters).
Integrated Gyro: built-in gyro can keep the vehicle in a straight line, and
Gyro sensitivity can be adjusted by transmitter, which fits for drifting and on-road cars.
Superb Fast Response: high resolution ratio of 4096, stable signal output to
provide a fast response for rock crawler, truck, buggy, drifting, etc.
Compact Case: small size its save space effectively and works
well for most of rc car receiver's box.
Simple Bind: easy-to-use bind button, only 1 second to
bind with your radio RC4GS/RC4GS V2/RC6GS V2/RC6GS/T8S/T8FB.
Attention: R6FG default have not turn on the gyro function.
Make sure the R6FG keep motionless when power on it,
because the R6FG will do the self-test.
Working Modeļ¼š
Normal Working Mode-- Green LED, gyro will not working.
Gyro Function Working Mode-- Red LED on indicate.
Quick press the ID SET switch 3 times within 1 second, the
LED change from green to red means gyro function has turn on.
Product Details
Frequency: 2.4GHz ISM band(2400MHz~2483.5MHz)
Size: 35*20*13mm
Channel: 6
Model: cars/boats
Modulation mode: GFSK
Spread spectrum: FHSS
10 modes memory storage
Antenna length: 200mm
Control distance: more than 400 meters
LCD screen: 128*64 resolution, LCD back light
Power supply: 4.8~10.0V DC
RF power: <10dbm
Channel resolution: 4096
Work current: 30mA
Compatible with transmitters: RC6GS, RC4GS, RC4G, RC3S, T8FB
RX-R6FG
Radiolink R6FG V4 2.4GHz 6 CH FHSS Receiver High Voltage Gyro Integrated For RC4GS RC3S RC4G T8FB RC6GS Transmitter
Radiolink R6FG V4 2.4GHz 6 CH FHSS Receiver High Voltage Gyro Integrated For RC4GS RC3S RC4G T8FB RC6GS Transmitter
  • 100 Units in Stock

Be the first to write a review.  Write a Review.
Safety Tip


This product was added to our catalog on Monday 25 April, 2022.

Content

OFFTHEGRIDWATER.CA

Rc-toys Multi Rotor safty Tip Keep your PROPS OFF not installed until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures - realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static - PROPS may start at anytime without warning. Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe. Never ASSUME the props will not start - removing the props removes the risk.



your alt text here