SIYI FT24 15KM 2.4G 12CH Long Range Radio Transmitter with FR RX


$200.00

Add to Cart:


  • Description
  • Details
  • Reviews
  • Custom Tab
Features
15KM long-distance flight $200
Expand Bluetooth, FPV, Link
Chinese and English custom voice broadcast
Telemetry data return
OTA wireless upgrade receiver
Support TF card
Bearing assembly Gimbal
4096 high resolution ratio channels
2MS high-speed response
2.8 inch high brightness color LCD screen
Chinese and English menu
Power voltage, RSSI signal return
Product Details
Brand Name: SIYI
Weight: 586g (without battery)
Size: 191*175*64mm
Maximum communication distance (no interference, no obstruction): 15 KM
Operating frequency: 2.400-2.483 GHz
Output: PPM/PWM/SBUS
Number of channels: 12 physical channels, 16 signal channels
Support models: multi-rotor/fixed-wing/glider/helicopter/car/ship
Support battery type: 18650 *2, 2S Lipo battery (Not Include)
Battery compartment size: 60*58*16 MM
Antenna gain: 2dbi
Working current (rated): 210mA
FR Receiver
Signal output: 16-channel S.Bus, 8-channel PPM, 8-channel PWM
Data interface: UART
Size (without antenna): 51.5*38*13mm
Weight (without antenna): 20g
Antenna gain: 2dbi
Operating voltage range: 5V-8.4V
Return voltage range: 0-50V
Working environment temperature: -10℃ to 55℃

SIYI FT24 15KM 2.4G 12CH Long Range Radio Transmitter with FR Receiver For TBS Crossfire/ Frsky R9M RF Module FPV Drones
SIYI FT24 15KM 2.4G 12CH Long Range Radio Transmitter with FR Receiver For TBS Crossfire/ Frsky R9M RF Module FPV Drones
SIYI FT24 15KM 2.4G 12CH Long Range Radio Transmitter with FR Receiver For TBS Crossfire/ Frsky R9M RF Module FPV Drones
SIYI FT24 15KM 2.4G 12CH Long Range Radio Transmitter with FR Receiver For TBS Crossfire/ Frsky R9M RF Module FPV Drones
  • 100 Units in Stock

Be the first to write a review.  Write a Review.
Safety Tip


This product was added to our catalog on Saturday 08 May, 2021.

Content

OFFTHEGRIDWATER.CA

Rc-toys Multi Rotor safty Tip Keep your PROPS OFF not installed until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures - realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static - PROPS may start at anytime without warning. Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe. Never ASSUME the props will not start - removing the props removes the risk.



your alt text here