DLE200 DLE 200CC Gasoline Engine for Paramotor


$2,756.99

Add to Cart:


  • Description
  • Details
  • Reviews
  • Custom Tab
Features
This engine is not a toy , before staring the engine ,read the operators manual carefully ,if failure to do so may result in personal injuries , DLE refuses any liabilityï¼›Before each operation, check the engine mount ,propeller and airframe carefully to ensure all engine screws and nuts is tight . Loctite(242,243) is strongly recommended during the installation.
■CAUTION : During the break-in period, it is recommended that the engine be installed on the aircraft or a test stand with an appropriate shock absorber. Otherwise it is probable that vibration could rebound back to the engine and serious damages may occur during the break-in period. For your safety and the safety of others, please do not stand in front or in line with the propeller when the engine is running.
Product Details
Type: 2 Stroke
Bore: 55mm
Stroke: 42mm
Displacement: 200CC
Power: 23HP/8000rpm
Compression Ratio: 10:1
Reduction Ratio: 1:2.7
Transmission Type: Belt
Starting Type: Electrical Start
Net Weight (without muffler): 10.3 Kg
Premium Muffler Weight: 2.2 Kg
Spark Plug: DLE-8A
Petrol: 93#, 97#
Alternator Output: 14V 1A
Premium Alternator Output: 14V 4A
Propeller: 1220mm
Applicable Pilot Weight: 120Kg
Item Packing
DLE200 Gasoline Engine x 1set
DLE200 DLE 200CC Gasoline Engine for Paramotor Standard Muffler Version
DLE200 DLE 200CC Gasoline Engine for Paramotor Standard Muffler Version
DLE200 DLE 200CC Gasoline Engine for Paramotor Standard Muffler Version
DLE200 DLE 200CC Gasoline Engine for Paramotor Standard Muffler Version
  • 50 Units in Stock

Be the first to write a review.  Write a Review.
Safety Tip


This product was added to our catalog on Wednesday 24 February, 2021.

Content

OFFTHEGRIDWATER.CA

Rc-toys Multi Rotor safty Tip Keep your PROPS OFF not installed until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures - realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static - PROPS may start at anytime without warning. Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe. Never ASSUME the props will not start - removing the props removes the risk.



your alt text here