Hydrogen powered Hexa-copter Skylle 1550H flight time 180min


$20,400.00

Add to Cart:


  • Description
  • Details
  • Reviews
  • Custom Tab
Features
Skylle 1550H is a hexa-copter hydrogen fuel-cell drone equipped with the latest
hydrogen fuel power system. It has an extended flight time up to 3 hours. Full carbon
fiber design brings the performance to a more stable and reliable level. Positioning
accuracy is up to 1cm with an optional RTK system. The lightweight frame is easy to
detach, making it extremely portable and easy to repair on the go if required. With a
plug-and-play connector for payload attaching and Gimbal controlling, the drone is
compatible with different payloads. The applicable fields covered includes survey,
mapping, inspection, public security, aerial photography, and others.
Product Details
Model Skylle 1550H
Aircraft type Hexa-copter
Aircraft size 2297(L) × 2297(W) × 645(H) mm
Wheelbase 1550 mm
Total weight (no load) <17 kg
Propeller size 29 inches
Power system Hydrogen fuel cell
Standard takeoff weight 18 kg
Max payload weight 1.5 kg
Endurance (no payload) 180 minutes
Cruising speed 0-10 m/s
Climbing speed 0-2 m/s
Max. flight altitude (above sea level) 5000 m
Communication & control frequency/range 2 km(2.4 GHz) / 10 km(900 MHz)
Communication range 10 km
Wind resistance 12 m/s（ level 6）
Operating temperature range -5~40 ℃
Operating humidity range 10%-90%
EMI (Electromagnetic interference resistance) 100 A/m PFMF (power frequency magnetic field)
Hydrogen storage volume 12 L
Hydrogen storage pressure 35 MPA

Hydrogen powered Hexa-copter Skylle 1550H flight time 180min
  • 100 Units in Stock

Be the first to write a review.  Write a Review.
Safety Tip

Product 86/125

 Prev 
 All 
 Next 

This product was added to our catalog on Thursday 14 April, 2022.

Content

OFFTHEGRIDWATER.CA

Rc-toys Multi Rotor safty Tip Keep your PROPS OFF not installed until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures - realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static - PROPS may start at anytime without warning. Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe. Never ASSUME the props will not start - removing the props removes the risk.



your alt text here