DJI S1000 Standard version 8 shaft aircraft+A2+5D(Ⅱ OR Ⅲ)C


$8,549.99

Add to Cart:


  • Description
  • Details
  • Reviews
  • Custom Tab
Features
DJI S1000 Standard version 8 shaft aircraft+A2+5D(Ⅱ OR Ⅲ)COMBO
Safe And Stable
Portable Easy To Use
Sparkproof Plug
Professional Octocopter
Low Gimbal Mounting Position
Retractable landing gear
ZENMUSE Z15-5D Gimbal
New Damping Design
Innovative Frame Arm Design
The S1000’s V type mixer design provides large amounts of propulsion while improving power efficiency. Combined with a DJI flight controllers like the A2, it is guaranteed to remain stable even with the loss of a rotor. Integrated into the center frame is a power distribution system using our patented coaxial cable connector.
It is more efficient, reliable and easy to install and eliminates the need for soldering. All frame arms as well as the retractable landing gear are made from carbon fiber, ensuring light weight and high structural stability.
Product Details
DJI S1000 Standard version 8 shaft aircraft+A2+5D(Ⅱ OR Ⅲ)COMBO
-Diagonal Wheelbase:1045mm
-Frame Arm Length:386mm
-Frame Arm Weight:(Including Motor, ESC, Propeller ) 325g
-Center Frame Diameter:337.5mm
-Center Frame Weight (With Landing Gear Mounting Base, Servos):1330g
-Landing Gear Size:460mm (Length) ×511mm (Width) ×305mm (Height), (Top width: 155 mm)
-Stator Size;41×14mm
-KV:400rpm/V
-Max Power:500W
-Weight(With Cooling Fan):158g
-Working Current:40A
-Working Voltage:6S LiPo
-Signal Frequency:30Hz ~ 450Hz
-Drive PWM Frequency:8KHz
-Weight(With Radiators):35g
Item Packing
-DJI S1000 Standard version 8 shaft aircraftx 1
-A2 CONTROLLER X 1
-Z155D2 OR Z155D3 X 1








  • 100 Units in Stock
  • Manufactured by: DJI

Be the first to write a review.  Write a Review.
Safety Tip


This product was added to our catalog on Monday 03 March, 2014.

Content

OFFTHEGRIDWATER.CA

Rc-toys Multi Rotor safty Tip Keep your PROPS OFF not installed until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures - realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static - PROPS may start at anytime without warning. Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe. Never ASSUME the props will not start - removing the props removes the risk.



your alt text here