32bit AlexMos Brushless Gimbal Controller by iflight RC


$135.00

Add to Cart:
Min:  5

  • Description
  • Details
  • Reviews
  • Custom Tab
32bit AlexMos Brushless Gimbal Controller
Features:
-A super light aluminum case for 32 bit alexmos BGC,which make it good finish items,and easier to plug it.
Specifications
-Size of the board: 50×50 mm
-Distance between the mounting holes: 45 mm
-Diameter of the mounting holes: 3 mm
-Power supply voltage: 8–25 V
-Maximum motor current: 1,5 A
-5V output current to power external devices: up to 1 A
BaseCam SimpleBGC 32-bit
The controller can be used for building high-quality 3-axis camera stabilizing systems which can be mounted to UAV and for building handheld camera stabilizers.
Basic functions of the controller
Optional second IMU, that will increase the short-term precision of the stabilization 10x-30x times and will make stable work in any frame position. Improved attitude estimation algorythms -32-bit MCU — ARM Cortex M4. Effectively calculates the complex tasks for 3-axes stabilization.
-Allows camera control with the RC or analog joystick.
-Use several switchable profiles for different modes of operation
-Increased number of inputs for controlling signals + 3 additional reserved input/output AUX1-AUX3.
-Supports variety of RC protocols: PWM, Sum-PPM, spektrum and s-bus.
-Battery voltage monitoring, compensating voltage drop in the PID-regulator.
-Low battery alarm (output to 5V active buzzer).
-Can supply up to 1A current for external devices on the 5V power line.
-Dedicated UART-socket to connect optional Bluetooth module
-Reverse-polarity protection, overheat and overcurrent protection
-USB interface for the PC connection, to configure, control and upgrade firmware.
-Graphical user interface to manage the settings. Windows / OS X / Linux versions.
-Control through the Serial-protocol using dedicated API. Blurtooth is an option to purchase.
  • 1000 Units in Stock

Be the first to write a review.  Write a Review.
Safety Tip


This product was added to our catalog on Tuesday 17 June, 2014.

Content

OFFTHEGRIDWATER.CA

Rc-toys Multi Rotor safty Tip Keep your PROPS OFF not installed until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures - realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static - PROPS may start at anytime without warning. Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe. Never ASSUME the props will not start - removing the props removes the risk.



your alt text here