RMD-L-12025 BGC 3 MOTOR kit Support BaseCam Electronics control

(image for) RMD-L-12025 BGC 3 MOTOR kit Support BaseCam Electronics control
RMD-L-12025 BGC 3 MOTOR kit Support BaseCam Electronics control
(image for) RMD-L-12025 BGC 3 MOTOR kit Support BaseCam Electronics control
RMD-L-12025 BGC 3 MOTOR kit Support BaseCam Electronics control
(image for) RMD-L-12025 BGC 3 MOTOR kit Support BaseCam Electronics control
  • 100 Units in Stock

 Ask a Question 

$1,200.00

Add to Cart:
Features
3 RMD-L-12025 Motors + AC5000 1 main BaseCamElectronics control+2pcs driver+1 pc IMU+1 USB convert to serial interface
1.Mechatronics design with built in motor drive and position sensor.
2.Large diameter with more pole pairs design ,providing higher torque and smaller space application.
3.Abundant product models, diameter range:20mm-140mm;torque range:0.02-5N.M
4.Support RMD Assistant setting, and easy use
5.Wide voltage input range, support customize winding
6.Environmental condition of working from -40 to 80 Celsius
7.Support multiple communication methods RS485 or Can Bus.
8.Standard industry closed loop control mode(torque /speed/position) and support customize function
9.Support motor speed up to 4000RPM
10.Multiple protection functions, over temperature, over voltage and over current.
11.Apply for the filed which need precise control low speed and large torque such as
service robot, laser radar, gimbal and Laboratory test equipment
Product Details
Technical specifications
【Item Name】 RMD-L-12025
【Turns】 T 40
【Nominal Voltage】 V 24
【Nominal Current】 A 5.35
【Nominal Torque】 N.M 5.08
【Nominal Speed】 rpm 162
【Max Speed】 rpm 245
【Max Instant Torque】 N.M 7.7
【Max Instant Current】 A 8.1
【Line Resistance】 Ω 2.8
【Wire Connect】 Y
【Phase to Phase Inductance】 mH 5
【Speed Constant】 rpm/V 10
【Torque Constant】 N.M/A 0.95
【Rotor Inertia】 gcm^2 5500
【Number of Pole Pairs】 21
【Motor Weight】 g 1145
【Working Temperature】 °C -20°C~80°C
【Max Demagnetize Temperature】 °C 120°C
Matched Driver Matched Driver 【Drive】 DRC10
【Input Voltage】 V 8~36
【Current】 A Normal:8A Instant:15A
【Nominal Power】 W 200
【Communication】 RS-485/CAN BUS
【Encoder】 14-bit magnetic encoder
【Baud Rate】 9600、19200、57600、115200(default)
【Communication frequency】 RS485@115200BPS:500HZ; CAN BUS@1MBPS:2KHZ
【Communication frequency】 Torque open loop:24kHZ/Speed loop:8kHZ/Position loop:4KHZ
【Control frequency】 Torque open loop/speed loop/position loop
【S-Curve】 YES
【ID switch】 YES
【Connector】 ZH1.5/8PIN
【Temperature sensor】 YES
RMD-L-12025
RMD-L-12025 BGC MOTOR Support BaseCam Electronics control
RMD-L-12025 BGC MOTOR Support BaseCam Electronics control
RMD-L-12025 BGC MOTOR Support BaseCam Electronics control

Product 73/93

 Previous 
 Return to the Product List 
 Next 

This product was added to our catalog on Friday 03 June, 2022.

Copyright © 2024 OFF THE GRID WATER. Powered by Zen Cart