Mini 3-Axis Stabilizer 4K 8MP Camera AI Identify Tracking Night


$300.00

Add to Cart:


  • Description
  • Details
  • Reviews
  • Custom Tab
Features
Pre order for AI camera for drone or robot vision ships when avaelebel
AI Smart Identify Tracking $300
1/1.7 Inch Sony CMOS
4K Ultra HD Photo & Video Recording
6X Digital Zoom
Upside Down Mode
Starlight Night Vision Camera
Product Details
Overall
Model: A8 mini
Video Output Port: Ethernet, HDMI, CVBS (AV)
Control Signal Input Port: S.Bus / UART / UDP
Control Signal Output Port: S.Bus
Working Voltage: 11 ~ 25.2 V
Power Consumption: Summit 12 W
Working Temperature: -10 ~ 50 ?
Dimension: 55*55*70 mm
Weight: Approx. 95 g
Gimbal
Angular Vibration Range: ±0.01°
Controllable Pitch Angle: -135° ~ +45°
Controllable Yaw Angle: -160° ~ +160°
Controllable Roll Angle: -30° ~ +30°
Camera
Lens: 6X Digital
Focal Length: 21 mm
Image Sensor: Sony 1/1.7-inch, 8 MP effective resolution
Aperture: F2.8
FOV: 93°
TF Recording Resolution:
* 4K (4096 x 2160) @ 25 fps
* 2K (2560 x 1440) @ 30 fps
* 1080p (1920 x 1080) @ 30 fps
* 720p (1280 x 720) @ 30 fps
Supported File System: FAT32 (exFAT will be supported later by firmware update)
Photography File Format: JPG
Video File Format: MP4
Supported MicroSD Cards: MicroSD Class10, max 128 GB
White Balance: Auto
SY-A8
SIYI A8 mini 4K 8MP Gimbal Camera AI Smart Identify and Tracking HDR Starlight Night Vision Mini 3-Axis Stabilizer
SIYI A8 mini 4K 8MP Gimbal Camera AI Smart Identify and Tracking HDR Starlight Night Vision Mini 3-Axis Stabilizer
SIYI A8 mini 4K 8MP Gimbal Camera AI Smart Identify and Tracking HDR Starlight Night Vision Mini 3-Axis Stabilizer
SIYI A8 mini 4K 8MP Gimbal Camera AI Smart Identify and Tracking HDR Starlight Night Vision Mini 3-Axis Stabilizer
SIYI A8 mini 4K 8MP Gimbal Camera AI Smart Identify and Tracking HDR Starlight Night Vision Mini 3-Axis Stabilizer
  • 100 Units in Stock

Be the first to write a review.  Write a Review.
Safety Tip


This product was added to our catalog on Friday 21 October, 2022.

Content

OFFTHEGRIDWATER.CA

Rc-toys Multi Rotor safty Tip Keep your PROPS OFF not installed until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures - realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static - PROPS may start at anytime without warning. Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe. Never ASSUME the props will not start - removing the props removes the risk.



your alt text here