T-Motor 705-X Integrated Motor ESC Power System MN705-S KV125


$460.00

Please Choose:

Motor





Add to Cart:


  • Description
  • Details
  • Reviews
  • Custom Tab
Features
• Fast and convenient $460
• Free of complicated mounting process
• Turn-key system, perfect compatibility, superb cost performance
• Modularized propulsion system
Product Details
MN705-S KV125 Motor
Steering: CCW OR CW
Motor Size: F79.2 * 42.4mm
Stator: Imported silicon steel sheet; Anti-rust treatment; 180°Chigh temperature-resisting coatings
Shaft Diameter: N:8mm, OUL:8mm
Bearing: Imported 608ZZ
Magnet Level: 150°C high temperature resistance
Lead Cable: 14AWG * 150mm
Copper Wire: 220°C high temperature resistance: Level C
Coil Insulation Test: 500V
Centrifugal Cooling Design: Yes
Rotor Dynamic Balance Standard: =5Mg
Motor Dynamic Balance Standard: =10Mg
IP: IP45
KV: 125
Idle Current (22V): 1.4A
Peak Current (180s): 45A
Max. Power (180s): 2200W
Internal Resistance: 63mO
Rated Voltage (Lipo): 12S
Alpha 80A HV ESC
Support Voltage (12S): 18-52.2V
Con.Current: 80A
Peak Current (10s): 100A
Standby Consumption: =50mA
BEC: NO
Throttle Pos. Ranae: 1100-1940us
Throttle Refresh Frequency: 500Hz
Throttle Response Speed: 300ms
MF2614 Propeller
Diameter: 26.4inch (671.8mm)
Pitch: 9.4inch (239.5mm)
Recommended Thrust / RPM: 2.8-5kg/ 2700~3800RPM
Ambient Temp: -40C~65°C
Materia: Polymer + CF
Recommended Max Thrust / RPM: 12kg / 5500RPM
Storage Temp / Humidity: -10°C~50°C/< 85%
705-X-CCW-CW
T-Motor 705-X Integrated Motor ESC Power System MN705-S KV125 CCW or CW For Multi-rotors UAV VTOL Drone
T-Motor 705-X Integrated Motor ESC Power System MN705-S KV125 CCW or CW For Multi-rotors UAV VTOL Drone
T-Motor 705-X Integrated Motor ESC Power System MN705-S KV125 CCW or CW For Multi-rotors UAV VTOL Drone
T-Motor 705-X Integrated Motor ESC Power System MN705-S KV125 CCW or CW For Multi-rotors UAV VTOL Drone
  • 100 Units in Stock

Be the first to write a review.  Write a Review.
Safety Tip

Product 186/255

 Prev 
 All 
 Next 

This product was added to our catalog on Tuesday 13 September, 2022.

Content

OFFTHEGRIDWATER.CA

Rc-toys Multi Rotor safty Tip Keep your PROPS OFF not installed until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures - realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static - PROPS may start at anytime without warning. Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe. Never ASSUME the props will not start - removing the props removes the risk.



your alt text here