5inch FPV Carbon Fiber Frame 240mm Wheelbase Mark4 HD DJI


$35.00

Add to Cart:


  • Description
  • Details
  • Reviews
  • Custom Tab
Features
* Mak4 fancy rack, lighter, better performance and more convenient to install.
* The H-shaped structure does not affect the flight experience at all. On the contrary,
the arm is shorter and lighter than the X-shaped structure. At the same time, the strength of the arm is higher.
* The cabin also reserves 30.5*30.5 and 20*20 hole control positions for flight control.
It is suitable for installation of various flight control equipment.
* The corners of the whole machine have been chamfered and polished.
The workmanship is fine and the structure is reasonable.
Product Details
Wheelbase:240mm
Size: 145 x 172mm
Weight: 120g
Arm thickness: 5MM
Upper center board: 2.5MM
Lower center plate: 2.5MM
Camera installation spacing: 19mm
Photo transmission installation hole spacing: compatible with 30.5mm/20m
Flight control installation hole spacing: compatible with 30.5mm/20mm
Recommended configuration( Not included)
Flight control: RF / kiss / F3 / F4 / F7
Motor: 2204 / 05 / 06 / 07 / 2305 / 2306 / 2307
Electric regulation: 20-50a
Battery: 3-6S 1500-2200mah
Propeller: 5 inches
Item Packing
MAK4 5inch FPV Carbon Fiber Frame x1set
MAK4-KIT
Mark4 HD DJI 5inch FPV Carbon Fiber Frame 240mm Wheelbase 5mm Arm FPV Freestyle Long Range Frame for RC Quadcopter Racing Drone
Mark4 HD DJI 5inch FPV Carbon Fiber Frame 240mm Wheelbase 5mm Arm FPV Freestyle Long Range Frame for RC Quadcopter Racing Drone
Mark4 HD DJI 5inch FPV Carbon Fiber Frame 240mm Wheelbase 5mm Arm FPV Freestyle Long Range Frame for RC Quadcopter Racing Drone
Mark4 HD DJI 5inch FPV Carbon Fiber Frame 240mm Wheelbase 5mm Arm FPV Freestyle Long Range Frame for RC Quadcopter Racing Drone
Mark4 HD DJI 5inch FPV Carbon Fiber Frame 240mm Wheelbase 5mm Arm FPV Freestyle Long Range Frame for RC Quadcopter Racing Drone
  • 100 Units in Stock

Be the first to write a review.  Write a Review.
Safety Tip


This product was added to our catalog on Sunday 27 February, 2022.

Content

OFFTHEGRIDWATER.CA

Rc-toys Multi Rotor safty Tip Keep your PROPS OFF not installed until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures - realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static - PROPS may start at anytime without warning. Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe. Never ASSUME the props will not start - removing the props removes the risk.



your alt text here