TITAN XL5 HD with DJI Air Unit Digital HD System GPS - ELRS RTF


Add to Cart:

  • Description
  • Details
  • Reviews
  • Custom Tab
TITAN XL5 HD with DJI Air Unit Digital HD System GPS - ELRS RTF
- XING 2208 (4S 2450KV/ 6S 1800KV) motors for more power
- Variable GoPro TPU mount (supports ND-Filter inserts)
- GPS pre-installed for more safety at a distance
- 360° TPU protection and Antenna mounts
- 6mm arm design for more durability
Product Details
- Camera plate thickness: 2mm (2.5mm included TPU inserts)
- Main body dimension: 185*133mm
- Bottom to top distance: 30mm
- Bottom plate thickness: 2mm
- Top plate thickness: 2mm
- Arm thickness: 6mm
- Wheelbase: 250mm
- Weight :145g
ELECTRONICS // BLITZ F7 Stack (F7 V1.1 + 50A 4in1 ESC):
FC //BLITZ F722 Flight Controller
Mount pattern: 30.5*30.5mm / 4mm PCB hole diameter
Smartaudio / IRC Tramp VTX protocol supported
Firmware target: IFLIGHT_BLITZ_F722
Motor outputs: 4x (SH1.0 connector)
Flash: 32MB (Blackbox flash)
I2C serial: SDA / SLA pads
Dimensions: 36.5*35 mm
Barometer: DPS310
OSD Chip: AT7456E
LED controller: Yes
MCU: STM32 F722
Beeper pad: Yes
Gyro: BMI270
Weight: 7.8g
ESC // SucceX 50A 4-in-1 ESC
BLHeliSuite download (BL32): https://github.com/blheli-configurator/blheli-configurator/releases
Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.
STM32G071 MCU, 48Mhz Runs BLHELI 32.X Firmware
Mounting Holes: 30.5*30.5mm/Φ3mm
Target: iFlight_G071_4in1
Dimension: 43*39mm
Telemetry: Supported
Current sensor: Yes
Volts input: 2-6S
Commando8 Specification:
ELRS module: ExpressLRS 915MHz or 2.4GHz (inbuilt in back of the radio)
- 915MHz system: SX1276
- 2.4GHz system: SX1280
BASE 2.4G Module:
- Supported Protocols: Futaba S-FHSS/Frsky D16/Frsky D8
- 2.4GHz system: CC2500
Antenna options:
- Dual-Band (915MHz+2.4GHz)
- Single-Band (915MHz)
- Single-Band (2.4GHz)
Control interface:
- 2x 2-position switches (can be used for arming; not momentary)
- 2x 5-axis menu buttons for full OpenTX or EdgeTX control
- 2x 3-position switches
RF Power:
- BASE 2.4GHz Multiprotocol // Max Output 100mW
- ExpressLRS 915MHz // Max Output 1000mW
- ExpressLRS 2.4GHz // Max Output 500mW
- Input: Mini High Precision Hall Gimbals with NMB bearings
- Battery: Built-in 4000mAh 1S2P 18650 Battery
- Charging: Type-C 20W Quick Charge
- Charging Connector: Type-C
- Radio Channels: 8
- Weight: 310g
TITAN XL5 HD RTF Included Components and Parts
- 1 x Commando 8 Radio Transmitter-ELRS (2.4G/915Mhz as optional)
- 4 x XING 2208 Motor Unibell(4S 2450KV / 6S 1800KV)
- 1 x DJI Air Unit Polar starlight Digital HD FPV system
- 2 x Nazgul F5 Propeller (Set of 4 - Color May Vary)
- 2x MMCX to RP-SMA Female Adapter Cable
- 1x SucceX BLHeli32 50A 4-in-1 ESC 2-6S
- 1 x iFlight Lipo Strap 20*250mm (Black)
- 1 x Pre-built and Tested TITAN XL5
- 2 x DJI FPV Air Unit Antenna
- 1x BLITZ F7 Flight Controller
- 1x GPS Module
TITAN XL5 HD with DJI Air Unit Digital HD System GPS - ELRS RTF
  • 100 Units in Stock

Be the first to write a review.  Write a Review.
Safety Tip

This product was added to our catalog on Friday 19 August, 2022.



Rc-toys Multi Rotor safty Tip Keep your PROPS OFF not installed until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures - realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static - PROPS may start at anytime without warning. Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe. Never ASSUME the props will not start - removing the props removes the risk.

your alt text here