Taurus X8 V3 HD Cinelifter with DJI Air Unit BNF


Add to Cart:

  • Description
  • Details
  • Reviews
  • Custom Tab
Taurus X8 V3 HD Cinelifter with DJI Air Unit - BNF
Optimized CG through the adjustable camera and battery mount
2kg max payload for various cinema and DSLR cameras
XING2 3110 1250KVefficient and powerful wide stator motors
Stable silicon-ball decoupled camera CNC mount
Redundant ESC and motor configuration
GPS flight data and rescue functionality
Product Details
Taurus X8 V3 BNF Specs:
Top and bottom plate spacing: 20-31mm (aluminum standoff height)
GPS module: iFlight M8Q-5883-GPS & Compass V2.0 (LINK)v
BLITZ F7 Pro Flight Controller (LINK)
Weight: 1.58kg (without battery)
Motor: XING 3110 1250KV
Body Size: 283*283mmmm
Wheelbase: 400mm
Propeller size: 8 inch
FC // BLITZ F7 Pro Flight Controller
Mount pattern: 35*35mm/ 4mm PCB hole diameter
Smartaudio / IRC Tramp VTX protocol supported
Firmware target: IFLIGHT_BLITZ_F7_PRO
Input Voltage: 14.8V-34V (4S-8S LIPO)
Motor outputs: 4x (SH1.25 connector)
Flash: 512MB (Blackbox flash)
I2C serial: SDA / SLA pads
Dimensions: 41*41.5mm
Barometer: DPS310
OSD Chip: AT7456E
LED controller: Yes
MCU: STM32 F722
Weight: 17g (±2)
Beeper pad: Yes
Gyro: MPU6000
ESC // BLITZ E80 4-IN-1 Pro 80A ESC
BLHeliSuite download (BL32): https://github.com/blheli-configurator/blheli-configurator/releases
Supports DShot DShot150/300/600/MultiShot/ OneShot etc.
Constant current:80A,100A(Burst)
Mounting Holes: 35*35mm/Φ3mm
Current sensor: Yes, scale 200
Telemetry: Supported
Volts input: 2-8S
Taurus X8 V3 HD BNF Included Components and Parts
8 x HQ 8X4X3 CW propeller + 8 x HQ 8X4X3 CW propeller (Color may vary)
2 x Albatross LHCP 5.8GHz SMA FPV Antenna
2 x iFlight Lipo Strap 20*400mm (Black)
2 x iFlight Lipo Strap 20*500mm (Black)
1 x Camera Power 12V 3A BEC Module
1 x DJI FPV Air Unit Module + Camera
1 x Fullsend X 6S 75C 4500mAh
1 x Taurus X8 V3 Frame
1 x Prop Wrench
Taurus X8 V3 HD Cinelifter with DJI Air Unit BNF
Taurus X8 V3 HD Cinelifter with DJI Air Unit BNF
  • 100 Units in Stock

Be the first to write a review.  Write a Review.
Safety Tip

This product was added to our catalog on Friday 19 August, 2022.



Rc-toys Multi Rotor safty Tip Keep your PROPS OFF not installed until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures - realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static - PROPS may start at anytime without warning. Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe. Never ASSUME the props will not start - removing the props removes the risk.

your alt text here