SW190B RC Jet Engine SWIWIN Thrust 19kg RC Jet Engine Turbojet


$3,000.00

Add to Cart:


  • Description
  • Details
  • Reviews
  • Custom Tab
Features
* Use 0 # diesel oil or 3 # aviation kerosene, switch to use the parameter free of adjustment
* Brushless starting motor, long service life
* Maintenance interval, every 25-35 hours of operation
* Service life: continuous maintenance and use, just like cars
* 32 bit high-speed operation ECU with short-circuit protection function
* With automatic restart function after flameout
* High precision brushless motor oil pump, accurate speed control
* Color ground display screen, which can be connected with main and auxiliary dual display screens
* The accelerator responds quickly and the acceleration and deceleration can be adjusted freely
* ECU provides serial port protocol, which can be connected to flight control external control
* With data retrieval function
* With operation data recording function
Product Details
Thrust: 19 kg / 41.8 Ib
RPM Range: 33.000 r / min~115,000 r / min
Rated Exhaust Temperature: 700C / 1292°F
Fuel Consumption: 380 m / min / 12.8 oz / min@ 90% Power 103,500 RPM
Fuel: Kerosene, Jet A or diesel Lubrication: 5% kerosene, Jet A or 3% diesel
Start: Full auto-start
Restart: Auto-restart
Engine Weight: 1457g / 51.4 0Z / 3.2 lb
Diameter: 110mm / 4.3 in
Length: 258mm / 10.2 in
Maintenance Interval: Every 25 hours
ECU Supply: 3 cell Ii-po
SW190B
Turbojet SW190B RC Jet Engine SWIWIN Thrust 19kg RC Jet Engine
Turbojet SW190B RC Jet Engine SWIWIN Thrust 19kg RC Jet Engine
Turbojet SW190B RC Jet Engine SWIWIN Thrust 19kg RC Jet Engine
Turbojet SW190B RC Jet Engine SWIWIN Thrust 19kg RC Jet Engine
  • 100 Units in Stock

Be the first to write a review.  Write a Review.
Safety Tip


This product was added to our catalog on Wednesday 02 November, 2022.

Content

OFFTHEGRIDWATER.CA

Rc-toys Multi Rotor safty Tip Keep your PROPS OFF not installed until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures - realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static - PROPS may start at anytime without warning. Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe. Never ASSUME the props will not start - removing the props removes the risk.



your alt text here