Home
Log In
TagLine Here
Aerial Photography CUSTOM UAV AR
Auto Pilot Controller
BRUSHLESS GIMBALS
Carbon fiber parts & fasteners
Cinematography & UAS Rentals
CineStar Replacement Parts
Electric air craft Motor & ESC
Multi Rotor Frame
Multi Rotor Parts
Multi Rotor RTF ARF KIT RC Craft
MultiCopter Propeller
RTF Ready to Play Kits
Transmitter & Receiver
Battery & Balance Charger
Brushless Motor
ESC
FPV Monitor
FPV Products & Parts
Mini Quad
Retractable Landing Gear
3D printer & Filament
Servos & Robots
Power Generator FUEL CELL
WHolesale
Multi Rotor DSLR Gimbal
Home
Multi Rotor DSLR Gimbal
Multi Rotor RTF ARF KIT RC Craft
TITAN XL5 HD with DJI Air Unit Digital HD System GPS - ELRS RTF
TITAN XL5 HD with DJI Air Unit Digital HD System GPS - ELRS RTF
TITAN XL5 HD with DJI Air Unit Digital HD System GPS - ELRS RTF
100 Units in Stock
Ask a Question
$1,234.00
Add to Cart:
Features
TITAN XL5 HD with DJI Air Unit Digital HD System GPS - ELRS RTF
- XING 2208 (4S 2450KV/ 6S 1800KV) motors for more power
- Variable GoPro TPU mount (supports ND-Filter inserts)
- GPS pre-installed for more safety at a distance
- 360° TPU protection and Antenna mounts
- 6mm arm design for more durability
Product Details
FRAME // TITAN XL5:
- Camera plate thickness: 2mm (2.5mm included TPU inserts)
- Main body dimension: 185*133mm
- Bottom to top distance: 30mm
- Bottom plate thickness: 2mm
- Top plate thickness: 2mm
- Arm thickness: 6mm
- Wheelbase: 250mm
- Weight :145g
ELECTRONICS // BLITZ F7 Stack (F7 V1.1 + 50A 4in1 ESC):
FC //BLITZ F722 Flight Controller
Mount pattern: 30.5*30.5mm / 4mm PCB hole diameter
Smartaudio / IRC Tramp VTX protocol supported
Firmware target: IFLIGHT_BLITZ_F722
Motor outputs: 4x (SH1.0 connector)
Flash: 32MB (Blackbox flash)
I2C serial: SDA / SLA pads
Dimensions: 36.5*35 mm
Barometer: DPS310
OSD Chip: AT7456E
LED controller: Yes
MCU: STM32 F722
Beeper pad: Yes
Gyro: BMI270
Weight: 7.8g
UARTS: 6
ESC // SucceX 50A 4-in-1 ESC
BLHeliSuite download (BL32): https://github.com/blheli-configurator/blheli-configurator/releases
Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.
STM32G071 MCU, 48Mhz Runs BLHELI 32.X Firmware
Mounting Holes: 30.5*30.5mm/Φ3mm
Target: iFlight_G071_4in1
Dimension: 43*39mm
Telemetry: Supported
Current sensor: Yes
Volts input: 2-6S
Weight:14.3g
BEC: No
Commando8 Specification:
ELRS module: ExpressLRS 915MHz or 2.4GHz (inbuilt in back of the radio)
- 915MHz system: SX1276
- 2.4GHz system: SX1280
BASE 2.4G Module:
- Supported Protocols: Futaba S-FHSS/Frsky D16/Frsky D8
- 2.4GHz system: CC2500
Antenna options:
- Dual-Band (915MHz+2.4GHz)
- Single-Band (915MHz)
- Single-Band (2.4GHz)
Control interface:
- 2x 2-position switches (can be used for arming; not momentary)
- 2x 5-axis menu buttons for full OpenTX or EdgeTX control
- 2x 3-position switches
RF Power:
- BASE 2.4GHz Multiprotocol // Max Output 100mW
- ExpressLRS 915MHz // Max Output 1000mW
- ExpressLRS 2.4GHz // Max Output 500mW
- Input: Mini High Precision Hall Gimbals with NMB bearings
- Battery: Built-in 4000mAh 1S2P 18650 Battery
- Charging: Type-C 20W Quick Charge
- Charging Connector: Type-C
- Radio Channels: 8
- Weight: 310g
TITAN XL5 HD RTF Included Components and Parts
- 1 x Commando 8 Radio Transmitter-ELRS (2.4G/915Mhz as optional)
- 4 x XING 2208 Motor Unibell(4S 2450KV / 6S 1800KV)
- 1 x DJI Air Unit Polar starlight Digital HD FPV system
- 2 x Nazgul F5 Propeller (Set of 4 - Color May Vary)
- 2x MMCX to RP-SMA Female Adapter Cable
- 1x SucceX BLHeli32 50A 4-in-1 ESC 2-6S
- 1 x iFlight Lipo Strap 20*250mm (Black)
- 1 x Pre-built and Tested TITAN XL5
- 2 x DJI FPV Air Unit Antenna
- 1x BLITZ F7 Flight Controller
- 1x GPS Module
Product 36/36
Previous
Return to the Product List
Next
This product was added to our catalog on Friday 19 August, 2022.
Home
Copyright © 2025
OFF THE GRID WATER
. Powered by
Zen Cart