Home ESC Holybro FC FETtec G4 Flight Controller Latest STM32G4 Processor

Holybro FC FETtec G4 Flight Controller Latest STM32G4 Processor

100 Units in Stock

$140.00

Add to Cart:

Features
The FETtec KISS FC G4 is a flight controller running the KISS V2 firmware
for high performance, simple setup. The flight controller has an onboard
real-pit for TBS Unify Pro Nano VTXs and headers for direct connection
to a TBS Crossfire Nano RX. The FETtec FC supports 30x30 and 20x20 mounting.
Features:
- STM32 G4 Processor, 170MHz with MPU6000 Gyro
- Built-in real Pit-Mode
- Seperate onboard 5V BEC For RX
- 5V/16V BEC for VTX
- 20x20mm M2 and 30.5mmx30.5mm M3 mounting holes
- 8 Native DSHOT2400 outputs
- 4 Signal and ground pads in each corner
- 8 pin connector for solder free FETtec ESC connection
Product Details
* Latest STM32G4 Processor
- 170Mhz + Math accelerator
- MPU6000
* Supply voltage 6-27V (2S-6S Lipo)
* 2x dedicated onboard BEC (max. 600mA each)
- 5V BEC for RX
- 5V/16V BEC for VTX (switchable and real Pit*)
* 2x 8 pin connector for solder free ESC connection
- Connector 1: ESC signal 1-4, telemetry, VCC, GND
- Connector 2: ESC signal 5-8 (depending on UAV type 1-4), telemetry, VCC, GND
* 1x 8 pin connector for solder free VTX, cam connection and OSD or digital systems
- real Pit* VCC, GND, Video in, Video out, BEC 5V/16V, VCS/TX3, RX3
* 2x 6 pin connectors for serials
- RX1, TX1, 3.3V, VCC, 5V, GND
- RX3, VCS/TX3, RGB LED, VCC, 5V, GND
* 1x 4 pin connector for receiver
- Signal, TLM, 5V, GND
* 5 UART serials
- UART 1 free
- UART 2 used for Receiver
- UART 3 free
- UART 4 used for onboard OSD, can be set free
- UART 5 used for ESCs / TLM / Onewire
* 4 ESC solder pads (Signal/GND) in each corner
* Buzzer pads
* 4 tiny RGB LEDs (selectable color)
* Supported ESC protocols
- PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire
* FETtec KISS firmware
* Onboard OSD
- Graphic OSD (STM32)
- Full KISS Tuning
- Filter (PIDs, Rates, Settings)
- LED control (RGB LED, Racewire)
- VTX
- Live data graphs (Voltage, motor rpm, current,
motor temp, gyro values, link quality)
- KISS GPS support + live map
- Custom graphic pilot logo
- Stick overlay
- Custom layout
- can be deactivated for usage of digital systems
* Connector type: JST-SH-1mm
Item Packing
1X FETtec KISS FC G4
1X 8 Pin SH1.0 Cable
1X 6 Pin SH1.0 Cable
4X M2 Anti-Vibration Silicone Grommet Insert
FET-G4
Holybro FETtec FC G4 Flight Controller Latest STM32G4 Processor /KISS FC Firmware /2S-6S Lipo /Onboard OSD For FPV Racing Drone

Holybro FETtec FC G4 Flight Controller Latest STM32G4 Processor /KISS FC Firmware /2S-6S Lipo /Onboard OSD For FPV Racing Drone

Product 90/139

Return to the Product List

This product was added to our catalog on Saturday 14 May, 2022.

Home

Holybro FC FETtec G4 Flight Controller Latest STM32G4 Processor

$140.00

Currencies